{"title":"Helmut Zepf CMF 1.5 System","description":"\u003cp\u003eThe \u003cstrong\u003eHelmut Zepf CMF 1.5 System\u003c\/strong\u003e represents a precision-engineered solution for craniomaxillofacial fixation, designed to meet the demanding requirements of oral and maxillofacial surgery. Manufactured by Helmut Zepf Medizintechnik, a long-established German instrument and implant specialist, this system delivers the reliability and accuracy that surgical teams depend on.\u003c\/p\u003e\u003ch2\u003eSystem Overview\u003c\/h2\u003e\u003cp\u003eThe Helmut Zepf CMF 1.5 System is a low-profile titanium plating system with a 1.5 mm screw diameter, making it well suited for delicate anatomical regions where minimal implant bulk is essential. The system is intended for use in procedures involving the fixation of small bone segments across the craniofacial skeleton, including orbital, nasal, and mid-face areas.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1.5 mm screw diameter for refined, low-profile fixation\u003c\/li\u003e\n\u003cli\u003eTitanium construction for biocompatibility and strength\u003c\/li\u003e\n\u003cli\u003ePrecision-machined components designed for consistent, reliable performance\u003c\/li\u003e\n\u003cli\u003eCompatible with the broader Helmut Zepf CMF instrument ecosystem\u003c\/li\u003e\n\u003cli\u003eSuitable for use in delicate craniofacial anatomical regions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eWithin the Helmut Zepf CMF 1.5 System, surgeons will find components appropriate for a range of fixation scenarios encountered in reconstructive and corrective maxillofacial procedures. The system's design supports efficient intraoperative handling, helping to streamline workflows in both elective and trauma settings.\u003c\/p\u003e\u003ch2\u003eQuality and Provenance\u003c\/h2\u003e\u003cp\u003eHelmut Zepf Medizintechnik brings decades of German engineering expertise to every component within the \u003cstrong\u003eHelmut Zepf CMF 1.5 System\u003c\/strong\u003e. Products are manufactured to rigorous standards, reflecting the company's commitment to quality and surgical precision.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat screw diameter does the Helmut Zepf CMF 1.5 System use?\u003c\/strong\u003e The system uses a 1.5 mm screw diameter, suitable for fine craniofacial fixation applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the implants made from?\u003c\/strong\u003e Components within this system are constructed from titanium, offering a well-established combination of biocompatibility, corrosion resistance, and mechanical strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this system suitable for trauma cases?\u003c\/strong\u003e The Helmut Zepf CMF 1.5 System is designed for use in both elective reconstructive procedures and trauma fixation scenarios within the craniofacial skeleton.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/CMF_e.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF CMF System flyer (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"cmf-system-drill-bit-1-3mm-dental-bur-08-523-13","title":"CMF System Drill Bit - Ø 1.3 mm, Drilling Depth 12 mm, Shank: RA | Helmut Zepf No. 08.523.13","description":"\u003cp\u003eThe \u003cstrong\u003eCMF system drill bit 1.3mm dental bur\u003c\/strong\u003e from Helmut Zepf is a precision-engineered rotary instrument designed for craniomaxillofacial surgical and dental applications requiring controlled, accurate drilling. With a working diameter of 1.3 mm and a drilling depth of 12 mm, this bur is suited for procedures demanding tight dimensional tolerances and consistent performance.\u003c\/p\u003e\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e Ø 1.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth:\u003c\/strong\u003e 12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e RA (Right Angle \/ Contra-Angle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e 08.523.13\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Helmut Zepf GmbH\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eCMF system drill bit 1.3mm dental bur\u003c\/strong\u003e is manufactured in Germany to rigorous quality standards, ensuring reliable dimensional accuracy and consistent cutting performance across clinical applications. The RA shank design provides compatibility with standard contra-angle handpieces commonly used in surgical and prosthetic workflows.\u003c\/p\u003e\u003cp\u003eHelmut Zepf instruments are recognised for their precision manufacturing heritage. This \u003cstrong\u003eCMF system drill bit 1.3mm dental bur\u003c\/strong\u003e upholds that standard, offering clinicians confidence in every procedure where exactness is critical.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCraniomaxillofacial (CMF) surgical procedures\u003c\/li\u003e\n\u003cli\u003eGuided drilling protocols requiring precise diameter control\u003c\/li\u003e\n\u003cli\u003eImplant site preparation and bone work at narrow dimensions\u003c\/li\u003e\n\u003cli\u003eProcedures requiring a defined 12 mm drilling depth limit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMade in Germany\u003c\/h2\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThis \u003cstrong\u003eCMF system drill bit 1.3mm dental bur\u003c\/strong\u003e is proudly made in Germany, reflecting Helmut Zepf's commitment to quality craftsmanship and clinical reliability.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat shank type does this drill bit use?\u003c\/strong\u003e This bur features an RA (Right Angle \/ Contra-Angle) shank, compatible with standard contra-angle handpieces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the drilling depth of this bur?\u003c\/strong\u003e The drilling depth is 12 mm, providing a defined working length suitable for controlled surgical drilling procedures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this bur suitable for CMF surgical use?\u003c\/strong\u003e Yes, this instrument is designed as part of a CMF system and is intended for craniomaxillofacial applications requiring a 1.3 mm diameter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/CMF_e.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF CMF System flyer (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":50531047342366,"sku":"08.523.13","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/0852313_1_63cd79fd-e5bd-4ecb-8b03-3fafe5bdf496.jpg?v=1781200974"},{"product_id":"cmf-system-drill-bit-1-6mm-dental-bur-08-524-16","title":"CMF System Drill Bit - Ø 1.6 mm, Drilling Depth 12 mm, Shank: RA | Helmut Zepf No. 08.524.16","description":"\u003cp\u003eThe \u003cstrong\u003eCMF system drill bit 1.6mm dental bur\u003c\/strong\u003e is a precision-engineered rotary instrument designed for use in craniomaxillofacial (CMF) surgical and dental applications. With a working diameter of 1.6 mm and a drilling depth of 12 mm, this drill bit delivers controlled, accurate penetration suited to demanding clinical environments. The shank type is RA (right-angle), making it compatible with standard contra-angle handpieces used across a wide range of dental and surgical procedures.\u003c\/p\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e Ø 1.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth:\u003c\/strong\u003e 12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e RA (Right-Angle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e Helmut Zepf No. 08.524.16\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePrecision Engineering for CMF Procedures\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eCMF system drill bit 1.6mm dental bur\u003c\/strong\u003e is manufactured by Helmut Zepf GmbH, a German producer known for the quality and consistency of its dental instrumentation. Each instrument is crafted to meet the precise tolerances required in professional clinical settings, ensuring repeatable performance across procedures. The RA shank design provides secure engagement with compatible handpieces, minimising vibration and supporting operator control during drilling.\u003c\/p\u003e\u003ch2\u003eMade in Germany\u003c\/h2\u003e\u003cp\u003eThis instrument is part of Helmut Zepf's range of dental burs and surgical tools proudly manufactured in Germany. German-made dental instruments are recognised for their exacting quality standards, material integrity, and durability in clinical use.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat procedures is this drill bit suitable for?\u003c\/strong\u003e The CMF system drill bit 1.6mm dental bur is intended for use in CMF surgical and dental drilling applications where precise, controlled bore diameters are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat handpiece is compatible with the RA shank?\u003c\/strong\u003e The RA (right-angle) shank is compatible with standard contra-angle dental handpieces. Always verify compatibility with your specific handpiece system before use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho manufactures this instrument?\u003c\/strong\u003e This drill bit is manufactured by Helmut Zepf GmbH and carries the article number 08.524.16.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/CMF_e.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF CMF System flyer (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":50531048161566,"sku":"08.524.16","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/0852416_1_76df118f-746c-4b8c-a4cf-8046ec20a62e.jpg?v=1781200972"},{"product_id":"cmf-system-drill-bit-2-0mm-dental-bur-08-524-19","title":"CMF System Drill Bit - Ø 2.0 mm, Drilling Depth 12 mm, Shank: RA | Helmut Zepf No. 08.524.19","description":"\u003cp\u003eThe \u003cstrong\u003eCMF system drill bit 2.0mm dental bur\u003c\/strong\u003e from Helmut Zepf is a precision-engineered rotary instrument designed for cranio-maxillofacial surgical and dental applications. With a working diameter of 2.0 mm and a drilling depth of 12 mm, this bur provides the controlled, consistent performance demanded in clinical environments. The RA (right-angle) shank configuration ensures compatibility with standard contra-angle handpieces used in dental and surgical settings.\u003c\/p\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling Depth:\u003c\/strong\u003e 12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e RA (Right Angle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Number:\u003c\/strong\u003e 08.524.19\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Helmut Zepf GmbH\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineered for Precision\u003c\/h2\u003e\u003cp\u003eAs part of the CMF system, this \u003cstrong\u003eCMF system drill bit 2.0mm dental bur\u003c\/strong\u003e is manufactured to exacting tolerances, ensuring reliable cutting performance with minimal deviation. The precise geometry of the drill tip promotes accurate positioning, reducing the risk of slippage during use. Clinicians working in maxillofacial surgery, implantology, or related disciplines will appreciate the consistent results this instrument delivers procedure after procedure.\u003c\/p\u003e\u003ch2\u003eMade in Germany\u003c\/h2\u003e\u003cp\u003eHelmut Zepf GmbH instruments, including this \u003cstrong\u003eCMF system drill bit 2.0mm dental bur\u003c\/strong\u003e, are proudly manufactured in Germany. German-engineered dental instruments are widely recognised for their high-quality materials, precise machining, and long-term durability — qualities that matter in demanding clinical workflows.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat shank type does this drill bit use?\u003c\/strong\u003e This bur features an RA (right-angle) shank, compatible with standard contra-angle handpieces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the drilling depth of this bur?\u003c\/strong\u003e The drilling depth is 12 mm, suitable for a range of CMF surgical and dental drilling applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this instrument part of the Helmut Zepf CMF system?\u003c\/strong\u003e Yes, this \u003cstrong\u003eCMF system drill bit 2.0mm dental bur\u003c\/strong\u003e (item no. 08.524.19) is part of the Helmut Zepf CMF instrumentation range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/CMF_e.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF CMF System flyer (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":50531048456478,"sku":"08.524.19","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/0852419_1_d25f6c2b-5c37-4121-b4b8-a5c5897bdfe9.jpg?v=1781200970"},{"product_id":"1-5-cmf-system-big-version-helmut-zepf","title":"1.5 CMF System (Big Version) | Helmut Zepf No. 47.504.15","description":"\u003cp\u003eThe \u003cstrong\u003e1.5 CMF System\u003c\/strong\u003e (Big Version) by Helmut Zepf is an advanced osteosynthesis solution engineered to support the rapid and complete regeneration of damaged bone function. Designed with flexibility and clinical precision in mind, this system provides optimal, uncomplicated set solutions tailored to every customer preference.\u003c\/p\u003e\u003ch2\u003eConfigurable Screw Options\u003c\/h2\u003e\u003cp\u003eThe 1.5 CMF System accommodates steel screws with a diameter of 1.0 mm alongside titanium screws available in diameters of 1.2 mm and 1.5 mm. Each screw type can be configured individually, allowing the system to be adapted for a wide range of indications without limitation. Customers select only the articles they require, effectively preventing unnecessary overloading of the system.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoated universal toolbox:\u003c\/strong\u003e Fixable and designed for individual equipping to match specific clinical needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExchangeable screw indicators:\u003c\/strong\u003e Racks for carrying screws can be marked with exchangeable indicators for clear and reliable screw identification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin carrier in the screw box:\u003c\/strong\u003e Extends the system practically with a pin set for fixing membranes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage for meshes and mini plates:\u003c\/strong\u003e Dedicated space ensures comprehensive organization within a single system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClinical Performance\u003c\/h2\u003e\u003cp\u003eThe tight, secure fit of the screws on the screwdriver with a self-retaining function enables safe take-up and precise positioning during surgical procedures. The self-cutting Phillips screws deliver superior stability and optimal insertion in osseous structures, reducing procedural complexity and supporting confident clinical outcomes.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003e1.5 CMF System\u003c\/strong\u003e reflects Helmut Zepf's commitment to German engineering quality — offering surgeons a modular, well-organized platform suitable for craniomaxillofacial applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScrews for this system, sold separately:\u003c\/strong\u003e Titanium screws Ø 1.5 mm (pack of 5): \u003ca href=\"\/products\/titanium-micro-screw-1-5-x-4-mm-phillips-blue-anodized-5-helmut-zepf-47-575-04\"\u003e4 mm\u003c\/a\u003e · \u003ca href=\"\/products\/titanium-micro-screw-1-5-x-6-mm-phillips-blue-anodized-5-helmut-zepf-47-575-06\"\u003e6 mm\u003c\/a\u003e · \u003ca href=\"\/products\/titanium-micro-screw-1-5-x-8-mm-phillips-blue-anodized-5-helmut-zepf-47-575-08\"\u003e8 mm\u003c\/a\u003e · \u003ca href=\"\/products\/titanium-micro-screw-1-5-x-10-mm-phillips-blue-anodized-5-helmut-zepf-47-575-10\"\u003e10 mm\u003c\/a\u003e · \u003ca href=\"\/products\/titanium-micro-screw-1-5-x-12-mm-phillips-blue-anodized-5-helmut-zepf-47-575-12\"\u003e12 mm\u003c\/a\u003e · \u003ca href=\"\/products\/titanium-micro-screw-1-5-x-13-mm-phillips-blue-anodized-5-helmut-zepf-47-575-13\"\u003e13 mm\u003c\/a\u003e; Emergency Titanium screws Ø 1.9 mm (pack of 3): \u003ca href=\"\/products\/emergency-titanium-micro-screw-1-9-x-6-mm-phillips-red-helmut-zepf-47-575-36\"\u003e6 mm\u003c\/a\u003e · \u003ca href=\"\/products\/emergency-titanium-micro-screw-1-9-x-9-mm-phillips-red-helmut-zepf-47-575-39\"\u003e9 mm\u003c\/a\u003e · \u003ca href=\"\/products\/emergency-titanium-micro-screw-1-9-x-13-mm-phillips-red-helmut-zepf-47-575-43\"\u003e13 mm\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat screw diameters are included in the 1.5 CMF System?\u003c\/strong\u003e The system supports steel screws of 1.0 mm diameter and titanium screws of 1.2 mm and 1.5 mm diameter, configurable individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the system be customized for different clinical indications?\u003c\/strong\u003e Yes. The 1.5 CMF System is designed with no limits on configuration, allowing users to select only the articles needed for each specific indication.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the self-retaining function?\u003c\/strong\u003e It refers to the secure fit between the screw and screwdriver, enabling safe and stable screw placement and positioning during osteosynthesis procedures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/CMF_e.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF CMF System flyer (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":50531390947614,"sku":"47.504.15","price":1399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/4750415_dd6c5d66-3aea-4e0c-9bc6-31f047785164.jpg?v=1781196644"},{"product_id":"1-5-cmf-system-compact-helmut-zepf-47-505-15","title":"1.5 CMF System (Compact Version) | Helmut Zepf No. 47.505.15","description":"\u003cp\u003eThe \u003cstrong\u003e1.5 CMF System\u003c\/strong\u003e (Compact Version) by Helmut Zepf is engineered to support osteosynthesis procedures, enabling the rapid and complete regeneration of damaged bone function. Designed with clinical flexibility in mind, this system provides optimal and uncomplicated set solutions tailored to individual customer preferences.\u003c\/p\u003e\u003ch2\u003eScrew Configuration \u0026amp; Versatility\u003c\/h2\u003e\u003cp\u003eThe 1.5 CMF System accommodates steel screws with a diameter of 1.0 mm alongside titanium screws available in diameters of 1.2 mm and 1.5 mm. Each configuration can be assembled individually, placing no limits on how the system is equipped for different indications. Clinicians select only the articles required, effectively preventing overloading the system and keeping instrumentation streamlined for every procedure.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoated universal toolbox:\u003c\/strong\u003e Fixable and designed for fully individual equipping to match specific clinical workflows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew identification racks:\u003c\/strong\u003e Racks for carrying screws can be marked with exchangeable screw indicators, ensuring clear and reliable identification at all times.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin carrier extension:\u003c\/strong\u003e A pin carrier in the screw box allows the system to be extended practically with a pin set for fixing membranes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh and mini plate storage:\u003c\/strong\u003e Dedicated space is provided for carrying meshes and mini plates, consolidating essential components in one place.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePrecision \u0026amp; Self-Retaining Function\u003c\/h2\u003e\u003cp\u003eThe tight, secure fit of the screws on the screwdriver—facilitated by a self-retaining function—enables safe take-up and precise positioning during surgical placement. The self-cutting Phillips screws deliver superior stability and optimal insertion into osseous structures, making the \u003cstrong\u003e1.5 CMF System\u003c\/strong\u003e a dependable choice for craniomaxillofacial applications.\u003c\/p\u003e\u003ch2\u003eMade in Germany\u003c\/h2\u003e\u003cp\u003eAs with all Helmut Zepf instruments, the \u003cstrong\u003e1.5 CMF System\u003c\/strong\u003e reflects a commitment to German manufacturing quality and clinical excellence.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Helmut Zepf reference number for this instrument?\u003c\/strong\u003e The manufacturer reference number is 47.505.15; use it for reordering and inventory identification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should this instrument be reprocessed?\u003c\/strong\u003e Follow the manufacturer’s reprocessing instructions and your local infection-control protocols; inspect the instrument before each use and after each cycle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this instrument made?\u003c\/strong\u003e It is manufactured by Helmut Zepf Medizintechnik in Seitingen-Oberflacht, Germany — a specialist in precision dental instruments since 1921.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/CMF_e.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF CMF System flyer (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":50531391078686,"sku":"47.505.15","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/4750515_5d5d630f-3278-400e-be0b-5afad34e0413.jpg?v=1781196638"},{"product_id":"titanium-micro-screw-1-5-x-12-mm-phillips-blue-anodized-5-helmut-zepf-47-575-12","title":"Titanium Micro Screw Ø 1.5 x 12 mm, Phillips drive, Blue Anodized - Pack of 5 | Helmut Zepf No. 47.575.12","description":"\u003cp\u003eThe \u003cstrong\u003etitanium micro screw Ø 1.5 x 12 mm\u003c\/strong\u003e (Phillips drive) is an osteosynthesis screw of the Helmut Zepf CMF 1.5 system, supplied in a pack of 5. Micro screws of this system fix bone blocks, osteosynthesis plates and membranes in dentoalveolar surgery and small-fragment osteosynthesis.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e Ø 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Titanium (anodized, colour-coded)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead \/ drive:\u003c\/strong\u003e Phillips drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 5 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e Helmut Zepf CMF 1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e 47.575.12\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColour-Coded System\u003c\/h2\u003e\u003cp\u003eScrew diameter is identified by colour — blue anodized — so the assistant can pick the right screw from the rack at a glance. Use the matching Ø 1.5 mm drill bit, screwdriver blade and inserting device of the CMF 1.5 system.\u003c\/p\u003e\u003ch2\u003eMade in Germany\u003c\/h2\u003e\u003cp\u003eHelmut Zepf osteosynthesis screws are manufactured in Germany to tight tolerances. Store them in a ZEPF screw rack or CMF box and follow the instructions for use for handling and reprocessing.\u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/helmut-zepf-cmf-1-5-system\"\u003eHelmut Zepf CMF 1.5 System\u003c\/a\u003e and \u003ca href=\"\/products\/1-5-cmf-system-big-version-helmut-zepf\"\u003e1.5 CMF System (Big Version)\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eHow many screws are in a pack?\u003c\/strong\u003e Each pack contains 5 screws of the same diameter and length. Order multiple packs to stock several positions in your screw rack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich drill and screwdriver should I use?\u003c\/strong\u003e Use the Ø 1.5 mm system drill bit for the pilot hole and a CMF 1.5 screwdriver blade or inserting device with Phillips drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the screws made of?\u003c\/strong\u003e Medical-grade titanium, anodized for colour coding by diameter. Handling, sterilisation and reprocessing must follow the Helmut Zepf screw instructions for use.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091032_47_SCHRAUBEN_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCMF screw instructions for use (PDF)\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zepf-dental.com\/wp-content\/uploads\/PDF\/katalog\/HZ_Dental_Catalog.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF Dental Catalog (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":60076984172830,"sku":"47.575.12","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/titanium-micro-screw-1-5-x-12-mm-phillips-blue-anodized-5-helmut-zepf-47-575-12.jpg?v=1790605084"},{"product_id":"titanium-micro-screw-1-5-x-13-mm-phillips-blue-anodized-5-helmut-zepf-47-575-13","title":"Titanium Micro Screw Ø 1.5 x 13 mm, Phillips drive, Blue Anodized - Pack of 5 | Helmut Zepf No. 47.575.13","description":"\u003cp\u003eThe \u003cstrong\u003etitanium micro screw Ø 1.5 x 13 mm\u003c\/strong\u003e (Phillips drive) is an osteosynthesis screw of the Helmut Zepf CMF 1.5 system, supplied in a pack of 5. Micro screws of this system fix bone blocks, osteosynthesis plates and membranes in dentoalveolar surgery and small-fragment osteosynthesis.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e Ø 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 13 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Titanium (anodized, colour-coded)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead \/ drive:\u003c\/strong\u003e Phillips drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 5 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e Helmut Zepf CMF 1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e 47.575.13\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColour-Coded System\u003c\/h2\u003e\u003cp\u003eScrew diameter is identified by colour — blue anodized — so the assistant can pick the right screw from the rack at a glance. Use the matching Ø 1.5 mm drill bit, screwdriver blade and inserting device of the CMF 1.5 system.\u003c\/p\u003e\u003ch2\u003eMade in Germany\u003c\/h2\u003e\u003cp\u003eHelmut Zepf osteosynthesis screws are manufactured in Germany to tight tolerances. Store them in a ZEPF screw rack or CMF box and follow the instructions for use for handling and reprocessing.\u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/helmut-zepf-cmf-1-5-system\"\u003eHelmut Zepf CMF 1.5 System\u003c\/a\u003e and \u003ca href=\"\/products\/1-5-cmf-system-big-version-helmut-zepf\"\u003e1.5 CMF System (Big Version)\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eHow many screws are in a pack?\u003c\/strong\u003e Each pack contains 5 screws of the same diameter and length. Order multiple packs to stock several positions in your screw rack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich drill and screwdriver should I use?\u003c\/strong\u003e Use the Ø 1.5 mm system drill bit for the pilot hole and a CMF 1.5 screwdriver blade or inserting device with Phillips drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the screws made of?\u003c\/strong\u003e Medical-grade titanium, anodized for colour coding by diameter. Handling, sterilisation and reprocessing must follow the Helmut Zepf screw instructions for use.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091032_47_SCHRAUBEN_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCMF screw instructions for use (PDF)\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zepf-dental.com\/wp-content\/uploads\/PDF\/katalog\/HZ_Dental_Catalog.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF Dental Catalog (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":60077012648222,"sku":"47.575.13","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/titanium-micro-screw-1-5-x-13-mm-phillips-blue-anodized-5-helmut-zepf-47-575-13.jpg?v=1790605108"},{"product_id":"emergency-titanium-micro-screw-1-9-x-6-mm-phillips-red-helmut-zepf-47-575-36","title":"Emergency Titanium Micro Screw Ø 1.9 x 6 mm, Phillips drive, Red Anodized - Pack of 3 | Helmut Zepf No. 47.575.36","description":"\u003cp\u003eThe \u003cstrong\u003eemergency titanium micro screw Ø 1.9 x 6 mm\u003c\/strong\u003e (Phillips drive) is an osteosynthesis screw of the Helmut Zepf CMF 1.5 system, supplied in a pack of 3. Emergency screws have a slightly larger diameter than the standard screws of the system. If a standard screw does not achieve primary stability — for example in soft bone or a stripped hole — the emergency screw can be placed in the same hole to regain a secure hold.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e Ø 1.9 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Titanium (anodized, colour-coded)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead \/ drive:\u003c\/strong\u003e Phillips drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 3 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e Helmut Zepf CMF 1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e 47.575.36\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColour-Coded System\u003c\/h2\u003e\u003cp\u003eScrew diameter is identified by colour — red anodized — so the assistant can pick the right screw from the rack at a glance. Use the matching Ø 1.5 mm drill bit, screwdriver blade and inserting device of the CMF 1.5 system.\u003c\/p\u003e\u003ch2\u003eMade in Germany\u003c\/h2\u003e\u003cp\u003eHelmut Zepf osteosynthesis screws are manufactured in Germany to tight tolerances. Store them in a ZEPF screw rack or CMF box and follow the instructions for use for handling and reprocessing.\u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/helmut-zepf-cmf-1-5-system\"\u003eHelmut Zepf CMF 1.5 System\u003c\/a\u003e and \u003ca href=\"\/products\/1-5-cmf-system-big-version-helmut-zepf\"\u003e1.5 CMF System (Big Version)\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eHow many screws are in a pack?\u003c\/strong\u003e Each pack contains 3 screws of the same diameter and length. Order multiple packs to stock several positions in your screw rack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich drill and screwdriver should I use?\u003c\/strong\u003e Emergency screws are placed in the existing hole of a standard Ø 1.5 mm screw that did not achieve stability, using the CMF 1.5 screwdriver blade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the screws made of?\u003c\/strong\u003e Medical-grade titanium, anodized for colour coding by diameter. Handling, sterilisation and reprocessing must follow the Helmut Zepf screw instructions for use.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091032_47_SCHRAUBEN_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCMF screw instructions for use (PDF)\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zepf-dental.com\/wp-content\/uploads\/PDF\/katalog\/HZ_Dental_Catalog.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF Dental Catalog (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":60077047513374,"sku":"47.575.36","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/emergency-titanium-micro-screw-1-9-x-6-mm-phillips-red-helmut-zepf-47-575-36.jpg?v=1790605131"},{"product_id":"emergency-titanium-micro-screw-1-9-x-9-mm-phillips-red-helmut-zepf-47-575-39","title":"Emergency Titanium Micro Screw Ø 1.9 x 9 mm, Phillips drive, Red Anodized - Pack of 3 | Helmut Zepf No. 47.575.39","description":"\u003cp\u003eThe \u003cstrong\u003eemergency titanium micro screw Ø 1.9 x 9 mm\u003c\/strong\u003e (Phillips drive) is an osteosynthesis screw of the Helmut Zepf CMF 1.5 system, supplied in a pack of 3. Emergency screws have a slightly larger diameter than the standard screws of the system. If a standard screw does not achieve primary stability — for example in soft bone or a stripped hole — the emergency screw can be placed in the same hole to regain a secure hold.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e Ø 1.9 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 9 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Titanium (anodized, colour-coded)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead \/ drive:\u003c\/strong\u003e Phillips drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 3 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e Helmut Zepf CMF 1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e 47.575.39\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColour-Coded System\u003c\/h2\u003e\u003cp\u003eScrew diameter is identified by colour — red anodized — so the assistant can pick the right screw from the rack at a glance. Use the matching Ø 1.5 mm drill bit, screwdriver blade and inserting device of the CMF 1.5 system.\u003c\/p\u003e\u003ch2\u003eMade in Germany\u003c\/h2\u003e\u003cp\u003eHelmut Zepf osteosynthesis screws are manufactured in Germany to tight tolerances. Store them in a ZEPF screw rack or CMF box and follow the instructions for use for handling and reprocessing.\u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/helmut-zepf-cmf-1-5-system\"\u003eHelmut Zepf CMF 1.5 System\u003c\/a\u003e and \u003ca href=\"\/products\/1-5-cmf-system-big-version-helmut-zepf\"\u003e1.5 CMF System (Big Version)\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eHow many screws are in a pack?\u003c\/strong\u003e Each pack contains 3 screws of the same diameter and length. Order multiple packs to stock several positions in your screw rack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich drill and screwdriver should I use?\u003c\/strong\u003e Emergency screws are placed in the existing hole of a standard Ø 1.5 mm screw that did not achieve stability, using the CMF 1.5 screwdriver blade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the screws made of?\u003c\/strong\u003e Medical-grade titanium, anodized for colour coding by diameter. Handling, sterilisation and reprocessing must follow the Helmut Zepf screw instructions for use.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091032_47_SCHRAUBEN_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCMF screw instructions for use (PDF)\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zepf-dental.com\/wp-content\/uploads\/PDF\/katalog\/HZ_Dental_Catalog.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF Dental Catalog (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":60077076644126,"sku":"47.575.39","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/emergency-titanium-micro-screw-1-9-x-9-mm-phillips-red-helmut-zepf-47-575-39.jpg?v=1790605154"},{"product_id":"emergency-titanium-micro-screw-1-9-x-13-mm-phillips-red-helmut-zepf-47-575-43","title":"Emergency Titanium Micro Screw Ø 1.9 x 13 mm, Phillips drive, Red Anodized - Pack of 3 | Helmut Zepf No. 47.575.43","description":"\u003cp\u003eThe \u003cstrong\u003eemergency titanium micro screw Ø 1.9 x 13 mm\u003c\/strong\u003e (Phillips drive) is an osteosynthesis screw of the Helmut Zepf CMF 1.5 system, supplied in a pack of 3. Emergency screws have a slightly larger diameter than the standard screws of the system. If a standard screw does not achieve primary stability — for example in soft bone or a stripped hole — the emergency screw can be placed in the same hole to regain a secure hold.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e Ø 1.9 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 13 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Titanium (anodized, colour-coded)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead \/ drive:\u003c\/strong\u003e Phillips drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 3 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e Helmut Zepf CMF 1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e 47.575.43\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColour-Coded System\u003c\/h2\u003e\u003cp\u003eScrew diameter is identified by colour — red anodized — so the assistant can pick the right screw from the rack at a glance. Use the matching Ø 1.5 mm drill bit, screwdriver blade and inserting device of the CMF 1.5 system.\u003c\/p\u003e\u003ch2\u003eMade in Germany\u003c\/h2\u003e\u003cp\u003eHelmut Zepf osteosynthesis screws are manufactured in Germany to tight tolerances. Store them in a ZEPF screw rack or CMF box and follow the instructions for use for handling and reprocessing.\u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/helmut-zepf-cmf-1-5-system\"\u003eHelmut Zepf CMF 1.5 System\u003c\/a\u003e and \u003ca href=\"\/products\/1-5-cmf-system-big-version-helmut-zepf\"\u003e1.5 CMF System (Big Version)\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eHow many screws are in a pack?\u003c\/strong\u003e Each pack contains 3 screws of the same diameter and length. Order multiple packs to stock several positions in your screw rack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich drill and screwdriver should I use?\u003c\/strong\u003e Emergency screws are placed in the existing hole of a standard Ø 1.5 mm screw that did not achieve stability, using the CMF 1.5 screwdriver blade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the screws made of?\u003c\/strong\u003e Medical-grade titanium, anodized for colour coding by diameter. Handling, sterilisation and reprocessing must follow the Helmut Zepf screw instructions for use.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091032_47_SCHRAUBEN_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCMF screw instructions for use (PDF)\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zepf-dental.com\/wp-content\/uploads\/PDF\/katalog\/HZ_Dental_Catalog.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF Dental Catalog (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":60077093486878,"sku":"47.575.43","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/emergency-titanium-micro-screw-1-9-x-13-mm-phillips-red-helmut-zepf-47-575-43.jpg?v=1790605177"},{"product_id":"phillips-screwdriver-blade-1-5-mm-15-mm-long-helmut-zepf-47-523-15","title":"Phillips Screwdriver Blade Ø 1.5 mm - 15 mm Long | Helmut Zepf No. 47.523.15","description":"\u003cp\u003eThis \u003cstrong\u003ePhillips screwdriver blade Ø 1.5 mm, 15 mm\u003c\/strong\u003e is a short 15 mm Phillips blade for Ø 1.5 mm micro screws. It belongs to the Helmut Zepf CMF 1.5 osteosynthesis system and fits the ZEPF screwdriver handles.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor screws:\u003c\/strong\u003e Ø 1.5 mm Phillips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e Helmut Zepf CMF 1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e 47.523.15\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSecure Screw Pick-Up and Placement\u003c\/h2\u003e\u003cp\u003eThe Phillips profile engages the screw head centrally so torque is transferred without slipping. That protects the small screw head and the surrounding tissue and makes placement predictable, even in dense bone.\u003c\/p\u003e\u003ch2\u003eComplete System\u003c\/h2\u003e\u003cp\u003eCombine with the CMF 1.5 screws, drill bits, screw racks and boxes. All components are made in Germany by Helmut Zepf and are designed for repeated reprocessing.\u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/helmut-zepf-cmf-1-5-system\"\u003eHelmut Zepf CMF 1.5 System\u003c\/a\u003e and \u003ca href=\"\/products\/screwdriver-handle-small-dental-cmf-screwdriver-blades-helmut-zepf-47-502-02\"\u003eSmall Dental Screwdriver (47.502.02)\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhich screws does it fit?\u003c\/strong\u003e Ø 1.5 mm Phillips screws of the Helmut Zepf CMF system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a handle included?\u003c\/strong\u003e No, blades and inserting devices are used with the ZEPF screwdriver handles, sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be sterilised?\u003c\/strong\u003e Yes, follow the Helmut Zepf reprocessing instructions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091032_47_SCHRAUBEN_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCMF screw instructions for use (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091007_WIEDERAUFBEREITUNG_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eReprocessing instructions (PDF)\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zepf-dental.com\/wp-content\/uploads\/PDF\/katalog\/HZ_Dental_Catalog.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF Dental Catalog (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":60077182943518,"sku":"47.523.15","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/phillips-screwdriver-blade-1-5-mm-15-mm-long-helmut-zepf-47-523-15.jpg?v=1790605261"},{"product_id":"phillips-screwdriver-blade-1-5-mm-60-mm-long-helmut-zepf-47-524-15","title":"Phillips Screwdriver Blade Ø 1.5 mm - 60 mm Long | Helmut Zepf No. 47.524.15","description":"\u003cp\u003eThis \u003cstrong\u003ePhillips screwdriver blade Ø 1.5 mm, 60 mm\u003c\/strong\u003e is a 60 mm Phillips blade for Ø 1.5 mm screws with extra reach for posterior sites. It belongs to the Helmut Zepf CMF 1.5 osteosynthesis system and fits the ZEPF screwdriver handles.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor screws:\u003c\/strong\u003e Ø 1.5 mm Phillips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e Helmut Zepf CMF 1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e 47.524.15\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSecure Screw Pick-Up and Placement\u003c\/h2\u003e\u003cp\u003eThe Phillips profile engages the screw head centrally so torque is transferred without slipping. That protects the small screw head and the surrounding tissue and makes placement predictable, even in dense bone.\u003c\/p\u003e\u003ch2\u003eComplete System\u003c\/h2\u003e\u003cp\u003eCombine with the CMF 1.5 screws, drill bits, screw racks and boxes. All components are made in Germany by Helmut Zepf and are designed for repeated reprocessing.\u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/helmut-zepf-cmf-1-5-system\"\u003eHelmut Zepf CMF 1.5 System\u003c\/a\u003e and \u003ca href=\"\/products\/screwdriver-handle-small-dental-cmf-screwdriver-blades-helmut-zepf-47-502-02\"\u003eSmall Dental Screwdriver (47.502.02)\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhich screws does it fit?\u003c\/strong\u003e Ø 1.5 mm Phillips screws of the Helmut Zepf CMF system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a handle included?\u003c\/strong\u003e No, blades and inserting devices are used with the ZEPF screwdriver handles, sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be sterilised?\u003c\/strong\u003e Yes, follow the Helmut Zepf reprocessing instructions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091032_47_SCHRAUBEN_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCMF screw instructions for use (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091007_WIEDERAUFBEREITUNG_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eReprocessing instructions (PDF)\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zepf-dental.com\/wp-content\/uploads\/PDF\/katalog\/HZ_Dental_Catalog.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF Dental Catalog (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":60077210370334,"sku":"47.524.15","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/phillips-screwdriver-blade-1-5-mm-60-mm-long-helmut-zepf-47-524-15.jpg?v=1790605283"},{"product_id":"universal-cmf-box-screw-systems-1-2-1-5-2-0-mm-helmut-zepf-47-501-03","title":"Universal CMF Box for Screw Systems Ø 1.2 \/ 1.5 \/ 2.0 mm | Helmut Zepf No. 47.501.03","description":"\u003cp\u003eThis \u003cstrong\u003euniversal CMF box\u003c\/strong\u003e from Helmut Zepf holds the screws, drill bits and instruments of the 1.2, 1.5 and 2.0 mm osteosynthesis systems in one sterilisable box, with a lid and removable inserts so every component has a fixed, visible place.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e Universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e Ø 1.2 \/ 1.5 \/ 2.0 mm screw systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Sterilisable stainless steel \/ plastic system box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e 47.501.03\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOrganised Osteosynthesis\u003c\/h2\u003e\u003cp\u003eMicro screws and pins are easy to lose and hard to tell apart once they leave their packaging. A dedicated system box keeps each diameter and length in its own labelled position, so the assistant can hand over exactly the screw the surgeon asks for and the team can see at a glance what needs restocking after the procedure.\u003c\/p\u003e\u003ch2\u003eBuilt for Reprocessing\u003c\/h2\u003e\u003cp\u003eThe box is designed to go through the washer-disinfector and steam steriliser with its contents, keeping screws and instruments organised from storage to the surgical field. It complements the Helmut Zepf CMF system kits, screwdriver blades and pin applicators.\u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/helmut-zepf-cmf-system-original\"\u003eHelmut Zepf CMF System\u003c\/a\u003e and \u003ca href=\"\/products\/1-2-cmf-system-big-version-helmut-zepf-47-504-12\"\u003e1.2 CMF System (Big Version)\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does this box hold?\u003c\/strong\u003e It is laid out for Ø 1.2 \/ 1.5 \/ 2.0 mm screw systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the box be sterilised with the screws inside?\u003c\/strong\u003e Yes — the box is designed for reprocessing together with its contents; follow the Helmut Zepf reprocessing instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre screws included?\u003c\/strong\u003e No. The box is supplied empty; screws, pins and instruments are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091007_WIEDERAUFBEREITUNG_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eReprocessing instructions (PDF)\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zepf-dental.com\/wp-content\/uploads\/PDF\/katalog\/HZ_Dental_Catalog.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF Dental Catalog (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":60077229048094,"sku":"47.501.03","price":389.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/universal-cmf-box-screw-systems-1-2-1-5-2-0-mm-helmut-zepf-47-501-03.jpg?v=1790605302"},{"product_id":"inserting-device-phillips-1-5-mm-screw-holder-cmf-screws-helmut-zepf-47-525-15","title":"Inserting Device, Phillips Ø 1.5 mm - Screw Holder for CMF Screws | Helmut Zepf No. 47.525.15","description":"\u003cp\u003eThis \u003cstrong\u003ePhillips inserting device Ø 1.5 mm\u003c\/strong\u003e is a screw-holding inserting device for Ø 1.5 mm Phillips screws. It belongs to the Helmut Zepf CMF 1.5 osteosynthesis system and fits the ZEPF screwdriver handles.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor screws:\u003c\/strong\u003e Ø 1.5 mm Phillips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e Helmut Zepf CMF 1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e 47.525.15\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSecure Screw Pick-Up and Placement\u003c\/h2\u003e\u003cp\u003eThe Phillips profile engages the screw head centrally so torque is transferred without slipping. That protects the small screw head and the surrounding tissue and makes placement predictable, even in dense bone.\u003c\/p\u003e\u003ch2\u003eComplete System\u003c\/h2\u003e\u003cp\u003eCombine with the CMF 1.5 screws, drill bits, screw racks and boxes. All components are made in Germany by Helmut Zepf and are designed for repeated reprocessing.\u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/helmut-zepf-cmf-1-5-system\"\u003eHelmut Zepf CMF 1.5 System\u003c\/a\u003e and \u003ca href=\"\/products\/screwdriver-handle-small-dental-cmf-screwdriver-blades-helmut-zepf-47-502-02\"\u003eSmall Dental Screwdriver (47.502.02)\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhich screws does it fit?\u003c\/strong\u003e Ø 1.5 mm Phillips screws of the Helmut Zepf CMF system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a handle included?\u003c\/strong\u003e No, blades and inserting devices are used with the ZEPF screwdriver handles, sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be sterilised?\u003c\/strong\u003e Yes, follow the Helmut Zepf reprocessing instructions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091032_47_SCHRAUBEN_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCMF screw instructions for use (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091007_WIEDERAUFBEREITUNG_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eReprocessing instructions (PDF)\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zepf-dental.com\/wp-content\/uploads\/PDF\/katalog\/HZ_Dental_Catalog.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF Dental Catalog (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":60077230915870,"sku":"47.525.15","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/inserting-device-phillips-1-5-mm-screw-holder-cmf-screws-helmut-zepf-47-525-15.jpg?v=1790605304"},{"product_id":"screwdriver-handle-small-dental-cmf-screwdriver-blades-helmut-zepf-47-502-02","title":"Screwdriver Handle, Small (Dental) - for CMF Screwdriver Blades | Helmut Zepf No. 47.502.02","description":"\u003cp\u003eThe \u003cstrong\u003esmall dental screwdriver handle\u003c\/strong\u003e is the compact handle for Helmut Zepf CMF screwdriver blades and inserting devices. Its knurled, rotating cap lets the surgeon turn micro screws with fingertip control while applying gentle axial pressure.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Small screwdriver handle (dental)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Holds CMF screwdriver blades and inserting devices\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e 47.502.02\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFingertip Control\u003c\/h2\u003e\u003cp\u003eA short, lightweight handle is ideal for the small screws used in dentoalveolar surgery — fixing bone blocks, membranes and tenting screws — where precise torque matters more than force.\u003c\/p\u003e\u003ch2\u003eSystem Handle\u003c\/h2\u003e\u003cp\u003eAccepts the ZEPF Phillips screwdriver blades and inserting devices for the CMF 1.0, 1.2 and 1.5 systems. Made in Germany by Helmut Zepf.\u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/helmut-zepf-cmf-system-original\"\u003eHelmut Zepf CMF System\u003c\/a\u003e and \u003ca href=\"\/products\/phillips-screwdriver-blade-1-2-mm-15-mm-long-helmut-zepf-47-523-12\"\u003ePhillips Screwdriver Blade Ø 1.2 mm (47.523.12)\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhich blades fit?\u003c\/strong\u003e The Helmut Zepf CMF screwdriver blades and inserting devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a blade included?\u003c\/strong\u003e No, blades are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it autoclavable?\u003c\/strong\u003e Yes, follow the Helmut Zepf reprocessing instructions.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091032_47_SCHRAUBEN_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCMF screw instructions for use (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091007_WIEDERAUFBEREITUNG_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eReprocessing instructions (PDF)\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zepf-dental.com\/wp-content\/uploads\/PDF\/katalog\/HZ_Dental_Catalog.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF Dental Catalog (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":60077253067038,"sku":"47.502.02","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/screwdriver-handle-small-dental-cmf-screwdriver-blades-helmut-zepf-47-502-02.jpg?v=1790605325"},{"product_id":"screw-pin-box-2-x-5-1-2-mm-screws-1-x-5-1-5-helmut-zepf-47-503-53","title":"Screw \u0026 Pin Box for 2 x 5 Ø 1.2 mm Screws, 1 x 5 Ø 1.5 mm Screws and 10 Membrane Pins | Helmut Zepf No. 47.503.53","description":"\u003cp\u003eThis \u003cstrong\u003eCMF screw and pin box for 1.2 and 1.5 mm screws\u003c\/strong\u003e from Helmut Zepf holds two rows of five Ø 1.2 mm screws, one row of five Ø 1.5 mm screws, ten membrane pins and a small instrument compartment in one sterilisable box.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e CMF 1.2 \/ 1.5 + pins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 2 x 5 Ø 1.2 mm screws, 1 x 5 Ø 1.5 mm screws, 10 membrane pins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Sterilisable stainless steel \/ plastic system box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e 47.503.53\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOrganised Osteosynthesis\u003c\/h2\u003e\u003cp\u003eMicro screws and pins are easy to lose and hard to tell apart once they leave their packaging. A dedicated system box keeps each diameter and length in its own labelled position, so the assistant can hand over exactly the screw the surgeon asks for and the team can see at a glance what needs restocking after the procedure.\u003c\/p\u003e\u003ch2\u003eBuilt for Reprocessing\u003c\/h2\u003e\u003cp\u003eThe box is designed to go through the washer-disinfector and steam steriliser with its contents, keeping screws and instruments organised from storage to the surgical field. It complements the Helmut Zepf CMF system kits, screwdriver blades and pin applicators.\u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/helmut-zepf-cmf-system-original\"\u003eHelmut Zepf CMF System\u003c\/a\u003e and \u003ca href=\"\/products\/1-2-cmf-system-big-version-helmut-zepf-47-504-12\"\u003e1.2 CMF System (Big Version)\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does this box hold?\u003c\/strong\u003e It is laid out for 2 x 5 Ø 1.2 mm screws, 1 x 5 Ø 1.5 mm screws, 10 membrane pins.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the box be sterilised with the screws inside?\u003c\/strong\u003e Yes — the box is designed for reprocessing together with its contents; follow the Helmut Zepf reprocessing instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre screws included?\u003c\/strong\u003e No. The box is supplied empty; screws, pins and instruments are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091007_WIEDERAUFBEREITUNG_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eReprocessing instructions (PDF)\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zepf-dental.com\/wp-content\/uploads\/PDF\/katalog\/HZ_Dental_Catalog.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF Dental Catalog (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":60077293895966,"sku":"47.503.53","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/screw-pin-box-2-x-5-1-2-mm-screws-1-x-5-1-5-helmut-zepf-47-503-53.jpg?v=1790605375"},{"product_id":"cmf-screw-rack-1-2-1-5-mm-stainless-steel-helmut-zepf-85-540-52","title":"CMF Screw Rack 1.2 \/ 1.5 mm - Stainless Steel Insert for Screw Boxes | Helmut Zepf No. 85.540.52","description":"\u003cp\u003eThe \u003cstrong\u003eCMF screw rack 1.2 \/ 1.5\u003c\/strong\u003e is a perforated stainless steel rack with laser-marked positions for Ø 1.2 \/ 1.5 mm osteosynthesis screws. It fits Helmut Zepf CMF system boxes and keeps every screw length in its own clearly labelled hole.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew diameters:\u003c\/strong\u003e Ø 1.2 \/ 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Perforated stainless steel with laser-marked sizes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Insert for CMF screw and system boxes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e 85.540.52\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClear Screw Management\u003c\/h2\u003e\u003cp\u003eEach position is marked with diameter and length, so the right screw is found immediately during surgery and missing sizes are obvious when the rack is restocked. The perforated design lets water, detergent and steam reach every screw during reprocessing.\u003c\/p\u003e\u003ch2\u003eModular System\u003c\/h2\u003e\u003cp\u003eRacks can be exchanged or combined inside the ZEPF CMF boxes to match the screw systems your practice uses. They are made in Germany from corrosion-resistant stainless steel.\u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/helmut-zepf-cmf-system-original\"\u003eHelmut Zepf CMF System\u003c\/a\u003e and \u003ca href=\"\/products\/universal-cmf-box-screw-systems-1-2-1-5-2-0-mm-helmut-zepf-47-501-03\"\u003eUniversal CMF Box (47.501.03)\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhich screw diameters does this rack take?\u003c\/strong\u003e It is laid out for Ø 1.2 \/ 1.5 mm screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre screws included?\u003c\/strong\u003e No, the rack is supplied empty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be reprocessed?\u003c\/strong\u003e Yes. It is stainless steel and designed for washer-disinfector and autoclave cycles.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091007_WIEDERAUFBEREITUNG_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eReprocessing instructions (PDF)\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zepf-dental.com\/wp-content\/uploads\/PDF\/katalog\/HZ_Dental_Catalog.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF Dental Catalog (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":60077347537182,"sku":"85.540.52","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/cmf-screw-rack-1-2-1-5-mm-stainless-steel-helmut-zepf-85-540-52.jpg?v=1790605424"},{"product_id":"cmf-screw-rack-1-5-1-5-mm-stainless-steel-helmut-zepf-85-540-54","title":"CMF Screw Rack 1.5 \/ 1.5 mm - Stainless Steel Insert for Screw Boxes | Helmut Zepf No. 85.540.54","description":"\u003cp\u003eThe \u003cstrong\u003eCMF screw rack 1.5 \/ 1.5\u003c\/strong\u003e is a perforated stainless steel rack with laser-marked positions for Ø 1.5 \/ 1.5 mm osteosynthesis screws. It fits Helmut Zepf CMF system boxes and keeps every screw length in its own clearly labelled hole.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew diameters:\u003c\/strong\u003e Ø 1.5 \/ 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Perforated stainless steel with laser-marked sizes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Insert for CMF screw and system boxes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e 85.540.54\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClear Screw Management\u003c\/h2\u003e\u003cp\u003eEach position is marked with diameter and length, so the right screw is found immediately during surgery and missing sizes are obvious when the rack is restocked. The perforated design lets water, detergent and steam reach every screw during reprocessing.\u003c\/p\u003e\u003ch2\u003eModular System\u003c\/h2\u003e\u003cp\u003eRacks can be exchanged or combined inside the ZEPF CMF boxes to match the screw systems your practice uses. They are made in Germany from corrosion-resistant stainless steel.\u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/helmut-zepf-cmf-system-original\"\u003eHelmut Zepf CMF System\u003c\/a\u003e and \u003ca href=\"\/products\/universal-cmf-box-screw-systems-1-2-1-5-2-0-mm-helmut-zepf-47-501-03\"\u003eUniversal CMF Box (47.501.03)\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhich screw diameters does this rack take?\u003c\/strong\u003e It is laid out for Ø 1.5 \/ 1.5 mm screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre screws included?\u003c\/strong\u003e No, the rack is supplied empty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be reprocessed?\u003c\/strong\u003e Yes. It is stainless steel and designed for washer-disinfector and autoclave cycles.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091007_WIEDERAUFBEREITUNG_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eReprocessing instructions (PDF)\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zepf-dental.com\/wp-content\/uploads\/PDF\/katalog\/HZ_Dental_Catalog.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF Dental Catalog (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":60077357302046,"sku":"85.540.54","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/cmf-screw-rack-1-5-1-5-mm-stainless-steel-helmut-zepf-85-540-54.jpg?v=1790605449"},{"product_id":"titanium-micro-screw-1-5-x-4-mm-phillips-blue-anodized-5-helmut-zepf-47-575-04","title":"Titanium Micro Screw Ø 1.5 x 4 mm, Phillips drive, Blue Anodized - Pack of 5 | Helmut Zepf No. 47.575.04","description":"\u003cp\u003eThe \u003cstrong\u003etitanium micro screw Ø 1.5 x 4 mm\u003c\/strong\u003e (Phillips drive) is an osteosynthesis screw of the Helmut Zepf CMF 1.5 system, supplied in a pack of 5. Micro screws of this system fix bone blocks, osteosynthesis plates and membranes in dentoalveolar surgery and small-fragment osteosynthesis.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e Ø 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Titanium (anodized, colour-coded)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead \/ drive:\u003c\/strong\u003e Phillips drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 5 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e Helmut Zepf CMF 1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e 47.575.04\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColour-Coded System\u003c\/h2\u003e\u003cp\u003eScrew diameter is identified by colour — blue anodized — so the assistant can pick the right screw from the rack at a glance. Use the matching Ø 1.5 mm drill bit, screwdriver blade and inserting device of the CMF 1.5 system.\u003c\/p\u003e\u003ch2\u003eMade in Germany\u003c\/h2\u003e\u003cp\u003eHelmut Zepf osteosynthesis screws are manufactured in Germany to tight tolerances. Store them in a ZEPF screw rack or CMF box and follow the instructions for use for handling and reprocessing.\u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/helmut-zepf-cmf-1-5-system\"\u003eHelmut Zepf CMF 1.5 System\u003c\/a\u003e and \u003ca href=\"\/products\/1-5-cmf-system-big-version-helmut-zepf\"\u003e1.5 CMF System (Big Version)\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eHow many screws are in a pack?\u003c\/strong\u003e Each pack contains 5 screws of the same diameter and length. Order multiple packs to stock several positions in your screw rack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich drill and screwdriver should I use?\u003c\/strong\u003e Use the Ø 1.5 mm system drill bit for the pilot hole and a CMF 1.5 screwdriver blade or inserting device with Phillips drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the screws made of?\u003c\/strong\u003e Medical-grade titanium, anodized for colour coding by diameter. Handling, sterilisation and reprocessing must follow the Helmut Zepf screw instructions for use.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091032_47_SCHRAUBEN_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCMF screw instructions for use (PDF)\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zepf-dental.com\/wp-content\/uploads\/PDF\/katalog\/HZ_Dental_Catalog.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF Dental Catalog (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":60077361037598,"sku":"47.575.04","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/titanium-micro-screw-1-5-x-4-mm-phillips-blue-anodized-5-helmut-zepf-47-575-04.jpg?v=1790605451"},{"product_id":"cmf-screw-rack-1-5-2-0-mm-stainless-steel-helmut-zepf-85-540-55","title":"CMF Screw Rack 1.5 \/ 2.0 mm - Stainless Steel Insert for Screw Boxes | Helmut Zepf No. 85.540.55","description":"\u003cp\u003eThe \u003cstrong\u003eCMF screw rack 1.5 \/ 2.0\u003c\/strong\u003e is a perforated stainless steel rack with laser-marked positions for Ø 1.5 \/ 2.0 mm osteosynthesis screws. It fits Helmut Zepf CMF system boxes and keeps every screw length in its own clearly labelled hole.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew diameters:\u003c\/strong\u003e Ø 1.5 \/ 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Perforated stainless steel with laser-marked sizes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Insert for CMF screw and system boxes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e 85.540.55\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClear Screw Management\u003c\/h2\u003e\u003cp\u003eEach position is marked with diameter and length, so the right screw is found immediately during surgery and missing sizes are obvious when the rack is restocked. The perforated design lets water, detergent and steam reach every screw during reprocessing.\u003c\/p\u003e\u003ch2\u003eModular System\u003c\/h2\u003e\u003cp\u003eRacks can be exchanged or combined inside the ZEPF CMF boxes to match the screw systems your practice uses. They are made in Germany from corrosion-resistant stainless steel.\u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/helmut-zepf-cmf-system-original\"\u003eHelmut Zepf CMF System\u003c\/a\u003e and \u003ca href=\"\/products\/universal-cmf-box-screw-systems-1-2-1-5-2-0-mm-helmut-zepf-47-501-03\"\u003eUniversal CMF Box (47.501.03)\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhich screw diameters does this rack take?\u003c\/strong\u003e It is laid out for Ø 1.5 \/ 2.0 mm screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre screws included?\u003c\/strong\u003e No, the rack is supplied empty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be reprocessed?\u003c\/strong\u003e Yes. It is stainless steel and designed for washer-disinfector and autoclave cycles.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091007_WIEDERAUFBEREITUNG_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eReprocessing instructions (PDF)\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zepf-dental.com\/wp-content\/uploads\/PDF\/katalog\/HZ_Dental_Catalog.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF Dental Catalog (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":60077386858782,"sku":"85.540.55","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/cmf-screw-rack-1-5-2-0-mm-stainless-steel-helmut-zepf-85-540-55.jpg?v=1790605473"},{"product_id":"titanium-micro-screw-1-5-x-6-mm-phillips-blue-anodized-5-helmut-zepf-47-575-06","title":"Titanium Micro Screw Ø 1.5 x 6 mm, Phillips drive, Blue Anodized - Pack of 5 | Helmut Zepf No. 47.575.06","description":"\u003cp\u003eThe \u003cstrong\u003etitanium micro screw Ø 1.5 x 6 mm\u003c\/strong\u003e (Phillips drive) is an osteosynthesis screw of the Helmut Zepf CMF 1.5 system, supplied in a pack of 5. Micro screws of this system fix bone blocks, osteosynthesis plates and membranes in dentoalveolar surgery and small-fragment osteosynthesis.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e Ø 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Titanium (anodized, colour-coded)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead \/ drive:\u003c\/strong\u003e Phillips drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 5 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e Helmut Zepf CMF 1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e 47.575.06\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColour-Coded System\u003c\/h2\u003e\u003cp\u003eScrew diameter is identified by colour — blue anodized — so the assistant can pick the right screw from the rack at a glance. Use the matching Ø 1.5 mm drill bit, screwdriver blade and inserting device of the CMF 1.5 system.\u003c\/p\u003e\u003ch2\u003eMade in Germany\u003c\/h2\u003e\u003cp\u003eHelmut Zepf osteosynthesis screws are manufactured in Germany to tight tolerances. Store them in a ZEPF screw rack or CMF box and follow the instructions for use for handling and reprocessing.\u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/helmut-zepf-cmf-1-5-system\"\u003eHelmut Zepf CMF 1.5 System\u003c\/a\u003e and \u003ca href=\"\/products\/1-5-cmf-system-big-version-helmut-zepf\"\u003e1.5 CMF System (Big Version)\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eHow many screws are in a pack?\u003c\/strong\u003e Each pack contains 5 screws of the same diameter and length. Order multiple packs to stock several positions in your screw rack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich drill and screwdriver should I use?\u003c\/strong\u003e Use the Ø 1.5 mm system drill bit for the pilot hole and a CMF 1.5 screwdriver blade or inserting device with Phillips drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the screws made of?\u003c\/strong\u003e Medical-grade titanium, anodized for colour coding by diameter. Handling, sterilisation and reprocessing must follow the Helmut Zepf screw instructions for use.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091032_47_SCHRAUBEN_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCMF screw instructions for use (PDF)\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zepf-dental.com\/wp-content\/uploads\/PDF\/katalog\/HZ_Dental_Catalog.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF Dental Catalog (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":60077388726558,"sku":"47.575.06","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/titanium-micro-screw-1-5-x-6-mm-phillips-blue-anodized-5-helmut-zepf-47-575-06.jpg?v=1790605475"},{"product_id":"titanium-micro-screw-1-5-x-8-mm-phillips-blue-anodized-5-helmut-zepf-47-575-08","title":"Titanium Micro Screw Ø 1.5 x 8 mm, Phillips drive, Blue Anodized - Pack of 5 | Helmut Zepf No. 47.575.08","description":"\u003cp\u003eThe \u003cstrong\u003etitanium micro screw Ø 1.5 x 8 mm\u003c\/strong\u003e (Phillips drive) is an osteosynthesis screw of the Helmut Zepf CMF 1.5 system, supplied in a pack of 5. Micro screws of this system fix bone blocks, osteosynthesis plates and membranes in dentoalveolar surgery and small-fragment osteosynthesis.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e Ø 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Titanium (anodized, colour-coded)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead \/ drive:\u003c\/strong\u003e Phillips drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 5 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e Helmut Zepf CMF 1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e 47.575.08\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColour-Coded System\u003c\/h2\u003e\u003cp\u003eScrew diameter is identified by colour — blue anodized — so the assistant can pick the right screw from the rack at a glance. Use the matching Ø 1.5 mm drill bit, screwdriver blade and inserting device of the CMF 1.5 system.\u003c\/p\u003e\u003ch2\u003eMade in Germany\u003c\/h2\u003e\u003cp\u003eHelmut Zepf osteosynthesis screws are manufactured in Germany to tight tolerances. Store them in a ZEPF screw rack or CMF box and follow the instructions for use for handling and reprocessing.\u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/helmut-zepf-cmf-1-5-system\"\u003eHelmut Zepf CMF 1.5 System\u003c\/a\u003e and \u003ca href=\"\/products\/1-5-cmf-system-big-version-helmut-zepf\"\u003e1.5 CMF System (Big Version)\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eHow many screws are in a pack?\u003c\/strong\u003e Each pack contains 5 screws of the same diameter and length. Order multiple packs to stock several positions in your screw rack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich drill and screwdriver should I use?\u003c\/strong\u003e Use the Ø 1.5 mm system drill bit for the pilot hole and a CMF 1.5 screwdriver blade or inserting device with Phillips drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the screws made of?\u003c\/strong\u003e Medical-grade titanium, anodized for colour coding by diameter. Handling, sterilisation and reprocessing must follow the Helmut Zepf screw instructions for use.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091032_47_SCHRAUBEN_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCMF screw instructions for use (PDF)\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zepf-dental.com\/wp-content\/uploads\/PDF\/katalog\/HZ_Dental_Catalog.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF Dental Catalog (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":60077410877726,"sku":"47.575.08","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/titanium-micro-screw-1-5-x-8-mm-phillips-blue-anodized-5-helmut-zepf-47-575-08.jpg?v=1790605498"},{"product_id":"rack-cmf-screws-1-0-x-4-1-2-x-4-1-5-x-2-stainless-steel-helmut-zepf-85-540-60","title":"Rack for CMF Screws Ø 1.0 x 4 \/ Ø 1.2 x 4 \/ Ø 1.5 x 2 - Stainless Steel | Helmut Zepf No. 85.540.60","description":"\u003cp\u003eThis \u003cstrong\u003erack for CMF screws\u003c\/strong\u003e combines several screw diameters on one laser-marked stainless steel insert — four Ø 1.0 mm, four Ø 1.2 mm and two Ø 1.5 mm screw lengths — so mixed screw systems can be stored and reprocessed together in a ZEPF CMF box.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayout:\u003c\/strong\u003e Ø 1.0 x 4 \/ Ø 1.2 x 4 \/ Ø 1.5 x 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolds:\u003c\/strong\u003e four Ø 1.0 mm, four Ø 1.2 mm and two Ø 1.5 mm screw lengths\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Perforated stainless steel, laser-marked\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e 85.540.60\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOne Rack, Several Systems\u003c\/h2\u003e\u003cp\u003eMany augmentation and fixation procedures use more than one screw diameter. A combined rack keeps them side by side with their sizes marked, which shortens hand-over times and makes stock checks simple after each case.\u003c\/p\u003e\u003ch2\u003eReprocessing-Ready\u003c\/h2\u003e\u003cp\u003eThe perforated stainless steel design allows thorough cleaning and steam penetration. The rack is made in Germany by Helmut Zepf and fits the ZEPF CMF system boxes.\u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/helmut-zepf-cmf-system-original\"\u003eHelmut Zepf CMF System\u003c\/a\u003e and \u003ca href=\"\/products\/universal-cmf-box-screw-systems-1-2-1-5-2-0-mm-helmut-zepf-47-501-03\"\u003eUniversal CMF Box (47.501.03)\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is the layout of this rack?\u003c\/strong\u003e It holds four Ø 1.0 mm, four Ø 1.2 mm and two Ø 1.5 mm screw lengths.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre screws included?\u003c\/strong\u003e No, the rack is supplied empty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich box does it fit?\u003c\/strong\u003e It is designed as an insert for Helmut Zepf CMF system and screw boxes.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091007_WIEDERAUFBEREITUNG_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eReprocessing instructions (PDF)\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zepf-dental.com\/wp-content\/uploads\/PDF\/katalog\/HZ_Dental_Catalog.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF Dental Catalog (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":60077412778270,"sku":"85.540.60","price":94.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/rack-cmf-screws-1-0-x-4-1-2-x-4-1-5-x-2-stainless-steel-helmut-zepf-85-540-60.jpg?v=1790605500"},{"product_id":"titanium-micro-screw-1-5-x-10-mm-phillips-blue-anodized-5-helmut-zepf-47-575-10","title":"Titanium Micro Screw Ø 1.5 x 10 mm, Phillips drive, Blue Anodized - Pack of 5 | Helmut Zepf No. 47.575.10","description":"\u003cp\u003eThe \u003cstrong\u003etitanium micro screw Ø 1.5 x 10 mm\u003c\/strong\u003e (Phillips drive) is an osteosynthesis screw of the Helmut Zepf CMF 1.5 system, supplied in a pack of 5. Micro screws of this system fix bone blocks, osteosynthesis plates and membranes in dentoalveolar surgery and small-fragment osteosynthesis.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e Ø 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Titanium (anodized, colour-coded)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead \/ drive:\u003c\/strong\u003e Phillips drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 5 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e Helmut Zepf CMF 1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e 47.575.10\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColour-Coded System\u003c\/h2\u003e\u003cp\u003eScrew diameter is identified by colour — blue anodized — so the assistant can pick the right screw from the rack at a glance. Use the matching Ø 1.5 mm drill bit, screwdriver blade and inserting device of the CMF 1.5 system.\u003c\/p\u003e\u003ch2\u003eMade in Germany\u003c\/h2\u003e\u003cp\u003eHelmut Zepf osteosynthesis screws are manufactured in Germany to tight tolerances. Store them in a ZEPF screw rack or CMF box and follow the instructions for use for handling and reprocessing.\u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/helmut-zepf-cmf-1-5-system\"\u003eHelmut Zepf CMF 1.5 System\u003c\/a\u003e and \u003ca href=\"\/products\/1-5-cmf-system-big-version-helmut-zepf\"\u003e1.5 CMF System (Big Version)\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eHow many screws are in a pack?\u003c\/strong\u003e Each pack contains 5 screws of the same diameter and length. Order multiple packs to stock several positions in your screw rack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich drill and screwdriver should I use?\u003c\/strong\u003e Use the Ø 1.5 mm system drill bit for the pilot hole and a CMF 1.5 screwdriver blade or inserting device with Phillips drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the screws made of?\u003c\/strong\u003e Medical-grade titanium, anodized for colour coding by diameter. Handling, sterilisation and reprocessing must follow the Helmut Zepf screw instructions for use.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091032_47_SCHRAUBEN_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCMF screw instructions for use (PDF)\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zepf-dental.com\/wp-content\/uploads\/PDF\/katalog\/HZ_Dental_Catalog.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF Dental Catalog (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":60077431488798,"sku":"47.575.10","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/titanium-micro-screw-1-5-x-10-mm-phillips-blue-anodized-5-helmut-zepf-47-575-10.jpg?v=1790605522"},{"product_id":"rack-cmf-screws-1-2-x-5-1-5-x-5-stainless-steel-helmut-zepf-85-540-65","title":"Rack for CMF Screws Ø 1.2 x 5 \/ Ø 1.5 x 5 - Stainless Steel | Helmut Zepf No. 85.540.65","description":"\u003cp\u003eThis \u003cstrong\u003erack for CMF screws\u003c\/strong\u003e combines several screw diameters on one laser-marked stainless steel insert — five Ø 1.2 mm and five Ø 1.5 mm screw lengths — so mixed screw systems can be stored and reprocessed together in a ZEPF CMF box.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayout:\u003c\/strong\u003e Ø 1.2 x 5 \/ Ø 1.5 x 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolds:\u003c\/strong\u003e five Ø 1.2 mm and five Ø 1.5 mm screw lengths\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Perforated stainless steel, laser-marked\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle Number:\u003c\/strong\u003e 85.540.65\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOne Rack, Several Systems\u003c\/h2\u003e\u003cp\u003eMany augmentation and fixation procedures use more than one screw diameter. A combined rack keeps them side by side with their sizes marked, which shortens hand-over times and makes stock checks simple after each case.\u003c\/p\u003e\u003ch2\u003eReprocessing-Ready\u003c\/h2\u003e\u003cp\u003eThe perforated stainless steel design allows thorough cleaning and steam penetration. The rack is made in Germany by Helmut Zepf and fits the ZEPF CMF system boxes.\u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/helmut-zepf-cmf-system-original\"\u003eHelmut Zepf CMF System\u003c\/a\u003e and \u003ca href=\"\/products\/universal-cmf-box-screw-systems-1-2-1-5-2-0-mm-helmut-zepf-47-501-03\"\u003eUniversal CMF Box (47.501.03)\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003e1-Year Warranty\u003c\/h2\u003e\u003cp\u003eThis Helmut Zepf instrument is covered by a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e against defects in materials and workmanship from the date of delivery.\u003c\/p\u003e\u003ch2\u003e60-Day Returns — Any Reason, Even If Used\u003c\/h2\u003e\u003cp\u003ePut this instrument to work in your practice. If it is not right for you, return it within 60 days of delivery for a \u003cstrong\u003efull refund — for any reason, even if it has been used\u003c\/strong\u003e.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is the layout of this rack?\u003c\/strong\u003e It holds five Ø 1.2 mm and five Ø 1.5 mm screw lengths.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre screws included?\u003c\/strong\u003e No, the rack is supplied empty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich box does it fit?\u003c\/strong\u003e It is designed as an insert for Helmut Zepf CMF system and screw boxes.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.zepf-dental.com\/IFU\/0703091007_WIEDERAUFBEREITUNG_HZ_BA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eReprocessing instructions (PDF)\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer literature:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zepf-dental.com\/wp-content\/uploads\/PDF\/katalog\/HZ_Dental_Catalog.pdf\" target=\"_blank\" rel=\"noopener\"\u003eZEPF Dental Catalog (PDF)\u003c\/a\u003e — more in our \u003ca href=\"\/pages\/helmut-zepf-surgical-instrument-library\"\u003eSurgical Instrument Library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":60077431718174,"sku":"85.540.65","price":94.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/rack-cmf-screws-1-2-x-5-1-5-x-5-stainless-steel-helmut-zepf-85-540-65.jpg?v=1790605525"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/collections\/4750415.jpg?v=1782253347","url":"https:\/\/deutschedt.com\/collections\/helmut-zepf-cmf-1-5-system.oembed?page=2","provider":"Deutsche Dental Technologien","version":"1.0","type":"link"}