{"title":"Periodontal Chisels","description":"\u003cp\u003ePeriodontal chisels are essential instruments in periodontal and oral surgery, designed to scale, split, and remove calculus deposits, reshape alveolar bone, and facilitate precise tissue management during a range of periodontal procedures. Built for accuracy and durability, these instruments are a cornerstone of any well-equipped dental operatory.\u003c\/p\u003e\u003ch2\u003eWhat Are Periodontal Chisels Used For?\u003c\/h2\u003e\u003cp\u003ePeriodontal chisels are primarily used to remove supragingival and subgingival calculus, detach periodontal ligament fibers, and contour bone during resective osseous surgery. Their sharp, beveled working ends allow clinicians to apply controlled lateral or push strokes without compromising the integrity of surrounding soft tissue. They are commonly employed alongside scalers, curettes, and elevators as part of a comprehensive instrument setup.\u003c\/p\u003e\u003ch2\u003eDesign and Construction\u003c\/h2\u003e\u003cp\u003eHigh-quality periodontal chisels are typically crafted from surgical-grade stainless steel or high-carbon steel, ensuring corrosion resistance, edge retention, and the ability to withstand repeated sterilization cycles. Ergonomic handles—whether round, hexagonal, or serrated—reduce operator fatigue during extended procedures and improve instrument control. Blade angles and widths vary by design, allowing clinicians to select the most appropriate instrument for anterior, posterior, or interproximal access.\u003c\/p\u003e\u003ch2\u003eSelecting the Right Instrument\u003c\/h2\u003e\u003cp\u003eWhen choosing periodontal chisels for your practice, consider blade width, angulation, and handle diameter. Wider blades suit broad bony surfaces, while narrower variants are better suited for interproximal areas. Single-ended and double-ended configurations are available, offering versatility within a streamlined instrument cassette.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eHow should periodontal chisels be maintained?\u003c\/strong\u003e Instruments should be inspected for sharpness before each use, sharpened with an appropriate sharpening stone when needed, and sterilized according to manufacturer and infection control guidelines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre periodontal chisels suitable for both scaling and osseous surgery?\u003c\/strong\u003e Yes. While their primary use is in osseous surgery and heavy calculus removal, periodontal chisels are versatile enough to support multiple stages of periodontal treatment.\u003c\/p\u003e","products":[{"product_id":"periodontal-chisel-ochsenbein-1-4mm-zepf-24490","title":"Periodontal Chisel, Ochsenbein (#1) - 4 mm  | Helmut Zepf No. 24.490.01","description":"\u003cp\u003eThe \u003cstrong\u003eperiodontal chisel\u003c\/strong\u003e Ochsenbein #1 by Helmut Zepf (No. 24.490.01) is a precision-engineered instrument designed to support demanding clinical periodontal procedures. With a 4 mm blade width, this instrument offers the controlled force delivery and access geometry that clinicians require when working in subgingival and interdental environments.\u003c\/p\u003e\u003ch2\u003eInstrument Overview\u003c\/h2\u003e\u003cp\u003eThe Ochsenbein design is a well-established configuration in periodontal surgery, valued for its angled blade and defined cutting edge that facilitate precise scaling, root planing, and bone contouring. This \u003cstrong\u003eperiodontal chisel\u003c\/strong\u003e variant, designated #1, is optimized for anterior and narrower access areas, making it a reliable choice for targeted tissue and osseous management.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOchsenbein #1 design — suited for anterior and restricted sites\u003c\/li\u003e\n\u003cli\u003e4 mm blade width for controlled, precise instrumentation\u003c\/li\u003e\n\u003cli\u003eManufactured by Helmut Zepf, a trusted German dental instrument maker\u003c\/li\u003e\n\u003cli\u003eMade in Germany — a benchmark for consistent quality and material integrity\u003c\/li\u003e\n\u003cli\u003eInstrument No. 24.490.01\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMade in Germany\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/p\u003e\u003cp\u003eHelmut Zepf instruments are manufactured in Germany, reflecting a tradition of craftsmanship and rigorous quality standards that dental professionals worldwide rely on. This \u003cstrong\u003eperiodontal chisel\u003c\/strong\u003e upholds that standard, providing clinicians with an instrument built for longevity and consistent clinical performance.\u003c\/p\u003e\u003ch2\u003eClinical Application\u003c\/h2\u003e\u003cp\u003eThis instrument is intended for use by trained dental and periodontal professionals. It is suitable for procedures involving subgingival debridement, osseous reshaping, and interdental access where a narrow, angled chisel profile is clinically advantageous.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Ochsenbein #1 periodontal chisel used for?\u003c\/strong\u003e It is used for subgingival scaling, root planing, and selective osseous contouring, particularly in anterior or restricted access sites.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat blade width does this instrument feature?\u003c\/strong\u003e This \u003cstrong\u003eperiodontal chisel\u003c\/strong\u003e has a 4 mm blade width, providing a balance between precision and effective tissue engagement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this instrument made in Germany?\u003c\/strong\u003e Yes, Helmut Zepf manufactures this instrument in Germany to consistent quality and craftsmanship standards.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":50531178152222,"sku":"24.490.01","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/2449001_1_10918996-aa00-44fc-80ca-3cfc361d6c4e.jpg?v=1781198435"},{"product_id":"periodontal-chisel-ochsenbein-2-4mm-zepf-24490","title":"Periodontal Chisel, Ochsenbein (#2) - 4 mm  | Helmut Zepf No. 24.490.02","description":"\u003cp\u003eThe \u003cstrong\u003eperiodontal chisel\u003c\/strong\u003e Ochsenbein #2 by Helmut Zepf (No. 24.490.02) is a precision-engineered instrument designed for demanding periodontal and surgical procedures. With a 4 mm blade width, this instrument delivers the controlled, targeted force required for effective osseous contouring and soft tissue management.\u003c\/p\u003e\u003ch2\u003eInstrument Overview\u003c\/h2\u003e\u003cp\u003eThe Ochsenbein #2 \u003cstrong\u003eperiodontal chisel\u003c\/strong\u003e is a well-established design in periodontal surgery, valued for its angled blade geometry that allows clinicians to access interdental and osseous areas with minimal trauma to surrounding tissues. Helmut Zepf instruments are manufactured in Germany to exacting quality standards, ensuring consistent performance across clinical procedures.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Periodontal Chisel, Ochsenbein #2\u003c\/li\u003e\n\u003cli\u003eBlade width: 4 mm\u003c\/li\u003e\n\u003cli\u003eManufacturer: Helmut Zepf (No. 24.490.02)\u003c\/li\u003e\n\u003cli\u003eMade in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClinical Application\u003c\/h2\u003e\u003cp\u003eThis \u003cstrong\u003eperiodontal chisel\u003c\/strong\u003e is particularly suited for osseous reshaping, removal of ledges and exostoses, and fine bone work during flap procedures. The blade angle characteristic of the Ochsenbein design facilitates access in areas where straight instruments would be ineffective, providing the precision demanded by experienced periodontists and oral surgeons.\u003c\/p\u003e\u003ch2\u003eQuality and Craftsmanship\u003c\/h2\u003e\u003cp\u003eHelmut Zepf dental instruments are produced in Germany, reflecting a long-standing tradition of precision manufacturing in dental instrumentation. Each instrument is crafted to support reliable, repeatable clinical outcomes.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Ochsenbein #2 periodontal chisel used for?\u003c\/strong\u003e It is used primarily for osseous contouring, removal of bone irregularities, and surgical access during periodontal flap procedures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat blade width does this instrument have?\u003c\/strong\u003e This model features a 4 mm blade width, appropriate for precise osseous work in periodontal surgery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this instrument made in Germany?\u003c\/strong\u003e Yes, Helmut Zepf instruments, including this periodontal chisel, are manufactured in Germany.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":50531178545438,"sku":"24.490.02","price":114.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/2449002_1_d8ded5d5-f11c-47cd-979b-d225d3bfa523.jpg?v=1781198432"},{"product_id":"ochsenbein-periodontal-chisel-3-working-tips-1-5mm","title":"Periodontal Chisel, Ochsenbein (#3) - Working Tips 1.5 mm | Helmut Zepf No. 24.491.01","description":"\u003cp\u003eThe \u003cstrong\u003eOchsenbein \u003c\/strong\u003e periodontal chisel (#3) by Helmut Zepf is a precision-crafted hand instrument designed for demanding periodontal procedures. Engineered in Germany, this instrument reflects the exacting standards that clinicians expect from professional-grade dental tooling.\u003c\/p\u003e\u003ch2\u003eInstrument Overview\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eOchsenbein \u003c\/strong\u003e chisel #3 features working tips measuring 1.5 mm, making it well suited for detailed scaling, root planing, and osseous contouring. Its geometry allows controlled access in periodontal pockets and interproximal areas where precision is critical.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDesign: Ochsenbein #3 periodontal chisel\u003c\/li\u003e\n\u003cli\u003eWorking tip width: 1.5 mm\u003c\/li\u003e\n\u003cli\u003eManufacturer: Helmut Zepf (Germany)\u003c\/li\u003e\n\u003cli\u003eInstrument reference: No. 24.491.01\u003c\/li\u003e\n\u003cli\u003eMade in Germany — manufactured to rigorous quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy Choose the Ochsenbein Chisel?\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eOchsenbein \u003c\/strong\u003e design is a time-tested periodontal instrument configuration trusted by dental professionals worldwide. Its angulated blade allows targeted removal of calculus and reshaping of alveolar bone with minimal tissue trauma. The 1.5 mm working tip provides a fine balance between reach and control, particularly valuable during open or closed flap debridement procedures.\u003c\/p\u003e\u003cp\u003eHelmut Zepf instruments are manufactured in Germany, ensuring consistent dimensional accuracy and material integrity across every unit. Clinicians who rely on the \u003cstrong\u003eOchsenbein \u003c\/strong\u003e chisel appreciate the predictable tactile feedback and durability that support long-term clinical performance.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat procedure is the Ochsenbein #3 chisel used for?\u003c\/strong\u003e It is primarily used in periodontal surgery for osseous contouring and calculus removal in interproximal and furcation areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the working tip size?\u003c\/strong\u003e The working tip measures 1.5 mm, as indicated in the instrument designation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this instrument made in Germany?\u003c\/strong\u003e Yes, Helmut Zepf instruments, including this chisel, are manufactured in Germany.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":50531178610974,"sku":"24.491.01","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/2449101_1_b2f1908c-05db-4ea2-b733-98c83fc8fe07.jpg?v=1781198431"},{"product_id":"periodontal-chisel-ochsenbein-4-working-tips-4mm","title":"Periodontal Chisel, Ochsenbein (#4) - Working Tips 4 mm  | Helmut Zepf No. 24.491.02","description":"\u003cp\u003eThe \u003cstrong\u003eperiodontal chisel\u003c\/strong\u003e Ochsenbein #4 by Helmut Zepf (No. 24.491.02) is a precision-engineered instrument designed for demanding periodontal and surgical procedures. With 4 mm working tips, this instrument delivers controlled, accurate tissue and bone management at the operative site.\u003c\/p\u003e\u003ch2\u003eInstrument Overview\u003c\/h2\u003e\u003cp\u003eThe Ochsenbein periodontal chisel is a trusted design within periodontal surgery, valued for its angled blade geometry that provides exceptional access to interproximal and subgingival areas. The #4 designation identifies the specific blade size and angulation, making it suitable for targeted osseous recontouring and soft tissue procedures. The 4 mm working tip ensures a focused, efficient cutting edge appropriate for precise clinical application.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInstrument: Periodontal Chisel, Ochsenbein #4\u003c\/li\u003e\n\u003cli\u003eWorking tip size: 4 mm\u003c\/li\u003e\n\u003cli\u003eManufacturer: Helmut Zepf (No. 24.491.02)\u003c\/li\u003e\n\u003cli\u003eMade in Germany — manufactured to rigorous German quality standards\u003c\/li\u003e\n\u003cli\u003eEngineered for durability, balance, and ergonomic handling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClinical Application\u003c\/h2\u003e\u003cp\u003eThis \u003cstrong\u003eperiodontal chisel\u003c\/strong\u003e is well-suited for osseous surgery, including reshaping of alveolar bone, interproximal access, and procedures requiring fine blade control. The Ochsenbein design facilitates visibility and instrument stability, supporting consistent clinical outcomes. As a Helmut Zepf instrument made in Germany, it reflects the high manufacturing standards associated with professional-grade dental surgical tools.\u003c\/p\u003e\u003ch2\u003eWhy Choose Helmut Zepf\u003c\/h2\u003e\u003cp\u003eHelmut Zepf instruments are recognized in dental practice for their precision craftsmanship and reliable performance. The \u003cstrong\u003eperiodontal chisel\u003c\/strong\u003e range reflects the brand's commitment to quality, offering clinicians instruments that maintain sharpness and structural integrity through repeated use and sterilization cycles.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Ochsenbein #4 periodontal chisel used for?\u003c\/strong\u003e It is used primarily for osseous recontouring and interproximal access during periodontal surgical procedures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the working tip size of this instrument?\u003c\/strong\u003e The working tips measure 4 mm, providing a focused cutting surface for precision work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this instrument made in Germany?\u003c\/strong\u003e Yes, this Helmut Zepf instrument is made in Germany to professional dental manufacturing standards.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":50531178643742,"sku":"24.491.02","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/2449102_1_2e322a12-228e-462b-9ee3-49b34545dc84.jpg?v=1781198428"},{"product_id":"periodontal-chisel-ch-fedi-1-double-ended-helmut-zepf","title":"Periodontal Chisel, CH Fedi (#1) - Double Ended, Working Tips 1.5 mm | Helmut Zepf No. 24.493.01","description":"\u003cp\u003eThe \u003cstrong\u003ePeriodontal Chisel\u003c\/strong\u003e CH Fedi (#1) by Helmut Zepf is a precision-engineered double-ended instrument designed to meet the exacting demands of periodontal therapy. Manufactured in Germany, this instrument carries the quality assurance that dental professionals worldwide associate with Helmut Zepf craftsmanship.\u003c\/p\u003e\u003ch2\u003eInstrument Overview\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003ePeriodontal Chisel\u003c\/strong\u003e CH Fedi (#1) features double-ended working tips measuring 1.5 mm, providing clinicians with versatile access during scaling and root planing procedures. The double-ended configuration allows seamless transition between working ends, reducing instrument exchange time and improving procedural efficiency.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e CH Fedi (#1) — Helmut Zepf No. 24.493.01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Double-ended instrument\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Tip Size:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClinical Application\u003c\/h2\u003e\u003cp\u003eAs a \u003cstrong\u003ePeriodontal Chisel\u003c\/strong\u003e, the CH Fedi design is particularly suited for removing supragingival calculus deposits and refining root surfaces. The 1.5 mm working tips allow for controlled adaptation to tooth morphology, supporting thorough debridement in anterior and accessible posterior regions.\u003c\/p\u003e\u003cp\u003eInstruments manufactured by Helmut Zepf are recognized for their consistent quality, balanced weight distribution, and durable construction. These characteristics contribute to reduced operator fatigue and enhanced tactile feedback during clinical use.\u003c\/p\u003e\u003ch2\u003eMade in Germany\u003c\/h2\u003e\u003cp\u003eThe \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e designation reflects adherence to rigorous manufacturing standards, ensuring each \u003cstrong\u003ePeriodontal Chisel\u003c\/strong\u003e delivers reliable, long-term performance in clinical environments.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat procedures is the CH Fedi Periodontal Chisel used for?\u003c\/strong\u003e It is primarily used for supragingival calculus removal and root surface debridement during periodontal therapy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the working tip size of this instrument?\u003c\/strong\u003e The working tips measure 1.5 mm, as specified for the CH Fedi (#1) double-ended design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this instrument double-ended?\u003c\/strong\u003e Yes, the Helmut Zepf No. 24.493.01 is a double-ended instrument, offering two working tips in a single handle.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":50531178676510,"sku":"24.493.01","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/2449301_1_8248ccad-52df-42b0-992e-88ca7acbaf80.jpg?v=1781198426"},{"product_id":"periodontal-chisel-ch-fedi-2-double-ended-helmut-zepf","title":"Periodontal Chisel, CH Fedi (#2) - Double Ended, Working Tips 2.5 mm | Helmut Zepf No. 24.493.02","description":"\u003cp\u003eThe \u003cstrong\u003ePeriodontal Chisel\u003c\/strong\u003e CH Fedi (#2) by Helmut Zepf (No. 24.493.02) is a double-ended instrument designed for precision scaling and root planing procedures in periodontal therapy. With working tips measuring 2.5 mm, this instrument delivers controlled, effective debridement in interproximal and subgingival areas where access is critical.\u003c\/p\u003e\u003ch2\u003eInstrument Overview\u003c\/h2\u003e\u003cp\u003eThe CH Fedi #2 \u003cstrong\u003ePeriodontal Chisel\u003c\/strong\u003e features a double-ended design that provides two functional working ends in a single instrument, improving clinical efficiency and reducing instrument exchange during procedures. The 2.5 mm working tips are engineered to access tight periodontal pockets and furcation areas with accuracy, making this instrument well-suited for both initial therapy and supportive periodontal treatment.\u003c\/p\u003e\u003ch2\u003eMade in Germany\u003c\/h2\u003e\u003cp\u003eThis \u003cstrong\u003ePeriodontal Chisel\u003c\/strong\u003e is manufactured in Germany, reflecting the precision engineering and quality standards associated with Helmut Zepf instrumentation. The instrument is produced to exacting tolerances, ensuring consistent tip geometry and reliable clinical performance across repeated use and sterilization cycles.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDesign: Double-ended for dual working access\u003c\/li\u003e\n\u003cli\u003eWorking Tip Size: 2.5 mm\u003c\/li\u003e\n\u003cli\u003ePattern: CH Fedi (#2)\u003c\/li\u003e\n\u003cli\u003eManufacturer: Helmut Zepf (Item No. 24.493.02)\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClinical Application\u003c\/h2\u003e\u003cp\u003eAs a dedicated \u003cstrong\u003ePeriodontal Chisel\u003c\/strong\u003e, this instrument is intended for use by dental hygienists and periodontists performing manual scaling, root planing, and periodontal debridement. Its balanced design supports ergonomic control during treatment, reducing operator fatigue over extended clinical sessions.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is the working tip size of this instrument?\u003c\/strong\u003e The working tips measure 2.5 mm, suited for subgingival and interproximal periodontal access.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this instrument double-ended?\u003c\/strong\u003e Yes, the CH Fedi #2 is a double-ended instrument, providing two working tips in a single handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this instrument manufactured?\u003c\/strong\u003e This instrument is made in Germany by Helmut Zepf.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":50531178709278,"sku":"24.493.02","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/2449302_1_1f623a07-225f-48e0-886a-86ea5809e9e7.jpg?v=1781198424"},{"product_id":"periodontal-chisel-ch-fedi-3-double-ended-helmut-zepf","title":"Periodontal Chisel, CH Fedi (#3) - Double Ended, Working Tips 3.5 mm | Helmut Zepf No. 24.493.03","description":"\u003cp\u003eThe \u003cstrong\u003ePeriodontal Chisel\u003c\/strong\u003e CH Fedi (#3) by Helmut Zepf (No. 24.493.03) is a double-ended instrument engineered for precise periodontal debridement and osseous contouring, featuring working tips of 3.5 mm. Designed and manufactured in Germany, this instrument reflects the exacting quality standards that Helmut Zepf is renowned for in the dental industry.\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThis \u003cstrong\u003ePeriodontal Chisel\u003c\/strong\u003e is a double-ended design, offering clinicians the convenience of two working ends in a single instrument. The CH Fedi #3 configuration features 3.5 mm working tips, making it well suited for targeted access to periodontal defects and interproximal areas. The balanced ergonomic handle supports controlled, confident instrumentation during both surgical and non-surgical periodontal procedures.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePattern: CH Fedi #3 — Double Ended\u003c\/li\u003e\n\u003cli\u003eWorking tip dimensions: 3.5 mm\u003c\/li\u003e\n\u003cli\u003eManufacturer: Helmut Zepf, Germany (No. 24.493.03)\u003c\/li\u003e\n\u003cli\u003eCrafted to rigorous German manufacturing standards\u003c\/li\u003e\n\u003cli\u003eSuitable for periodontal osseous and soft-tissue procedures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy Choose a Helmut Zepf Periodontal Chisel?\u003c\/h2\u003e\u003cp\u003eHelmut Zepf instruments are produced in Germany, where precision engineering and durable material selection are central to every product. The \u003cstrong\u003ePeriodontal Chisel\u003c\/strong\u003e CH Fedi #3 is designed to deliver consistent, reliable performance across repeated clinical use cycles, with a finish and balance that supports operator control and reduces fatigue during extended procedures.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is the working tip size of this Periodontal Chisel?\u003c\/strong\u003e The working tips measure 3.5 mm, as specified for the CH Fedi #3 pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this instrument double ended?\u003c\/strong\u003e Yes, the CH Fedi (#3) is a double-ended instrument, providing two functional working ends for clinical versatility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is this instrument manufactured?\u003c\/strong\u003e This \u003cstrong\u003ePeriodontal Chisel\u003c\/strong\u003e is manufactured in Germany by Helmut Zepf, ensuring adherence to high-quality production standards.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":50531178807582,"sku":"24.493.03","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/2449303_1_a9644bf4-34c4-4dc2-9d3c-e6d902280c72.jpg?v=1781198421"},{"product_id":"rhodes-back-action-chisel-36-37-bone-removal-4-3mm","title":"Rhodes Back Action Chisel # 36\/37, Straight, Ideal for Bone Material Removal and Bone Contouring - Working Tips 4.3 mm | Helmut Zepf No. 24.494.00","description":"\u003cp\u003eThe \u003cstrong\u003eBack Action Chisel\u003c\/strong\u003e Rhodes 36\/37 by Helmut Zepf is a precision-crafted periodontal instrument designed for effective bone material removal and bone contouring procedures. With working tips measuring 4.3 mm, this instrument delivers controlled, targeted action in demanding clinical environments.\u003c\/p\u003e\u003ch2\u003eInstrument Overview\u003c\/h2\u003e\u003cp\u003eThe Rhodes 36\/37 \u003cstrong\u003eBack Action Chisel\u003c\/strong\u003e is engineered for periodontists and oral surgeons who require consistent performance and ergonomic handling during osseous surgery. The straight design facilitates direct access to surgical sites, allowing clinicians to refine alveolar bone contours with accuracy and confidence.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument Type:\u003c\/strong\u003e Back Action Chisel — Rhodes 36\/37, Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Application:\u003c\/strong\u003e Bone material removal and bone contouring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Tip Width:\u003c\/strong\u003e 4.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Helmut Zepf — Helmut Zepf No. 24.494.00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClinical Application\u003c\/h2\u003e\u003cp\u003eThe straight geometry of this \u003cstrong\u003eBack Action Chisel\u003c\/strong\u003e makes it particularly suited for periodontal and pre-implant bone surgery, where precise reshaping of osseous tissue is critical to procedural success. The instrument's tip dimension of 4.3 mm provides an appropriate working surface for detailed contouring without compromising tissue management.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat procedures is this Back Action Chisel designed for?\u003c\/strong\u003e It is designed primarily for bone material removal and bone contouring in periodontal and oral surgical procedures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the working tip width of the Rhodes 36\/37?\u003c\/strong\u003e The working tip measures 4.3 mm, providing a precise contact area for osseous tissue management.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this instrument made in Germany?\u003c\/strong\u003e Yes, this instrument is manufactured in Germany by Helmut Zepf, model number 24.494.00.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":50531178840350,"sku":"24.494.00","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/2449400_1_5a95a6ae-fb88-4f6f-bb62-ef0f8239e61f.jpg?v=1781198419"},{"product_id":"back-action-chisel-buser-curette-bone-scraper-3-4mm","title":"Back Action Chisels, Curette Bone Scraper by Buser 3 mm\/4 mm  | Helmut Zepf No. 24.495.01","description":"\u003cp\u003eThe \u003cstrong\u003eback action chisel\u003c\/strong\u003e by Buser (Helmut Zepf No. 24.495.01) is a precision-engineered instrument designed for exacting bone preparation and curette scraping procedures in oral surgery and implantology. Available in dual working widths of 3 mm and 4 mm, this instrument delivers versatile, controlled osseous manipulation across a range of clinical scenarios.\u003c\/p\u003e\u003ch2\u003eInstrument Overview\u003c\/h2\u003e\u003cp\u003eThe back action chisel configuration positions the blade to engage bone tissue via a pulling stroke rather than a conventional push. This geometry provides enhanced tactile feedback and greater precision when contouring alveolar bone margins — making it particularly valuable in guided bone regeneration (GBR) procedures, socket preparation, and periosteal elevation where delicate tissue management is essential.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDual working end sizes: 3 mm and 4 mm\u003c\/li\u003e\n\u003cli\u003eBack action (curette) blade geometry for a controlled pull-stroke technique\u003c\/li\u003e\n\u003cli\u003eManufactured in Germany to rigorous quality standards\u003c\/li\u003e\n\u003cli\u003eCompatible with standard sterilization protocols\u003c\/li\u003e\n\u003cli\u003eErgonomic handle design for sustained clinical use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality and Origin\u003c\/h2\u003e\u003cp\u003eCarrying a Made in Germany designation, this \u003cstrong\u003eback action chisel\u003c\/strong\u003e is produced under the stringent manufacturing conditions associated with Helmut Zepf's established reputation for high-quality dental and surgical hand instruments. German-made instruments in this category are widely recognized for dimensional accuracy, material integrity, and long-term durability through repeated sterilization cycles.\u003c\/p\u003e\u003ch2\u003eClinical Application\u003c\/h2\u003e\u003cp\u003eThe Buser \u003cstrong\u003eback action chisel\u003c\/strong\u003e is suited for oral surgeons, periodontists, and implant specialists who require reliable, consistent instrument performance during bone contouring, graft site preparation, and fine osseous trimming. The 3 mm variant is ideal for narrower anatomical sites, while the 4 mm version addresses broader working areas with equal precision.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat procedures is the back action chisel best suited for?\u003c\/strong\u003e It is primarily used in guided bone regeneration (GBR), socket preparation, alveolar bone contouring, graft site preparation, and periosteal elevation in oral surgery and implantology.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat sizes are available?\u003c\/strong\u003e This instrument is available in 3 mm and 4 mm working widths to accommodate both narrow and broader anatomical sites.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this instrument compatible with autoclave sterilization?\u003c\/strong\u003e It is engineered for compatibility with standard sterilization protocols, consistent with Helmut Zepf's manufacturing standards for surgical hand instruments.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":50531178873118,"sku":"24.495.01","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/2449501_1_53436e84-d379-4a9f-b424-a4b098f42e65.jpg?v=1781198417"},{"product_id":"back-action-chisel-curette-bone-scraper-buser-4mm-5mm","title":"Back Action Chisels, Curette Bone Scraper by Buser 4 mm\/5 mm  | Helmut Zepf No. 24.495.02","description":"\u003cp\u003eThe \u003cstrong\u003eback action chisel\u003c\/strong\u003e by Buser (Helmut Zepf No. 24.495.02) is a precision-engineered curette bone scraper designed for exacting osseous procedures in oral surgery and implantology. Available in a dual working-end configuration of 4 mm and 5 mm, this instrument delivers controlled, efficient bone removal and contouring with each stroke.\u003c\/p\u003e\u003ch2\u003eInstrument Overview\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eback action chisel\u003c\/strong\u003e design is characterized by its angled blade geometry, which enables the clinician to engage and scrape bone surfaces in areas that are difficult to access with conventional straight instruments. The Buser curette bone scraper configuration is particularly suited to ridge preparation, defect debridement, and periosteal work where tactile sensitivity and directional control are paramount. Its ergonomic form supports consistent hand positioning, reducing operator fatigue during extended procedures.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDual working ends: 4 mm and 5 mm blade widths for versatile application\u003c\/li\u003e\n\u003cli\u003eBack action chisel geometry for posterior and restricted-access sites\u003c\/li\u003e\n\u003cli\u003eManufactured to Helmut Zepf quality standards in Germany\u003c\/li\u003e\n\u003cli\u003eSuitable for bone scraping, contouring, and curette procedures\u003c\/li\u003e\n\u003cli\u003eInstrument reference: Helmut Zepf No. 24.495.02\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMade in Germany\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/p\u003e\u003cp\u003eThis \u003cstrong\u003eback action chisel\u003c\/strong\u003e is manufactured in Germany, reflecting Helmut Zepf's longstanding commitment to high-grade dental instrument production. German manufacturing is synonymous with precise tolerances, durable material selection, and rigorous quality control — attributes that translate directly into consistent clinical performance across demanding surgical environments.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat procedures is the back action chisel best suited for?\u003c\/strong\u003e It is primarily used in oral surgery and implantology for bone scraping, ridge preparation, and osseous contouring in sites with limited access.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the available blade widths for this instrument?\u003c\/strong\u003e This model is supplied with both a 4 mm and a 5 mm working end, offering flexibility across different clinical indications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this instrument reusable and autoclavable?\u003c\/strong\u003e As a professional-grade dental instrument from Helmut Zepf, it is designed for repeated clinical use; please follow your facility's sterilization protocols.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho is this instrument intended for?\u003c\/strong\u003e This instrument is intended for use by trained oral surgeons, implantologists, and periodontists requiring precision osseous instrumentation.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":50531178905886,"sku":"24.495.02","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/2449502_1_63c0f9e3-b04b-4e29-830c-3227e4a4f64c.jpg?v=1781198415"},{"product_id":"back-action-chisel-curette-bone-scraper-buser-3mm-5mm","title":"Back Action Chisels, Curette Bone Scraper by Buser 3 mm\/5 mm  | Helmut Zepf No. 24.495.03","description":"\u003cp\u003eThe \u003cstrong\u003eback action chisel\u003c\/strong\u003e by Buser (Helmut Zepf No. 24.495.03) is a precision-engineered surgical instrument designed for demanding bone scraping and curette procedures in oral and maxillofacial surgery. Available in dual working widths of 3 mm and 5 mm, this instrument addresses a broad range of clinical requirements within a single, well-balanced design.\u003c\/p\u003e\u003ch2\u003eInstrument Overview\u003c\/h2\u003e\u003cp\u003eThe back action chisel configuration enables the clinician to apply controlled, directed force through a pulling motion, making it particularly effective for accessing confined anatomical spaces where conventional push-action instruments are impractical. The curette bone scraper geometry by Buser supports precise removal and contouring of both cortical and cancellous bone tissue, supporting accuracy during implant site preparation and osseous surgical procedures.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDual working ends: 3 mm and 5 mm blade widths\u003c\/li\u003e\n\u003cli\u003eBack action (pull-stroke) cutting design for enhanced control and access\u003c\/li\u003e\n\u003cli\u003eCurette bone scraper profile developed by Buser\u003c\/li\u003e\n\u003cli\u003eManufactured in Germany to Helmut Zepf quality standards\u003c\/li\u003e\n\u003cli\u003eSuitable for osseous surgical and implant site preparation procedures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMade in Germany\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/p\u003e\u003cp\u003eThis \u003cstrong\u003eback action chisel\u003c\/strong\u003e is crafted in Germany, reflecting the rigorous manufacturing standards and material quality for which Helmut Zepf instruments are recognized in professional dental and surgical settings worldwide. The combination of proven design principles and German engineering ensures reliable, consistent performance across clinical applications.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is the intended use of a back action chisel?\u003c\/strong\u003e A back action chisel is used in oral surgery and implantology to scrape, contour, and remove bone tissue using a controlled pull stroke, providing access in areas where push-action instruments are impractical.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat blade widths are available?\u003c\/strong\u003e This instrument features two working ends — a 3 mm and a 5 mm blade — providing versatility for different site dimensions and procedural requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this instrument reusable and sterilizable?\u003c\/strong\u003e As a professional-grade surgical hand instrument, it is intended for reuse following standard sterilization protocols applicable to stainless steel dental instruments.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":50531178938654,"sku":"24.495.03","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/2449503_1_ddb8f144-a9d0-4fb2-b032-128af02675ae.jpg?v=1781198413"},{"product_id":"bone-chisel-modified-vienna-straight-3mm-41-540-03wm","title":"Bone Rotary Chisel, Modified Vienna - Straight, 3 mm, Flat Handle Total Length 130 mm  | Helmut Zepf No. 41.540.03WM","description":"\u003cp\u003eThe \u003cstrong\u003eBone Chisel\u003c\/strong\u003e from Helmut Zepf GmbH — the Modified Vienna Straight model — is a precision-engineered surgical instrument built for demanding osseous procedures in oral, maxillofacial, and periodontal surgical settings. Designed and manufactured in Germany, this instrument delivers the dimensional accuracy and material integrity that professional clinical environments demand.\u003c\/p\u003e\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Bone Rotary Chisel, Modified Vienna, Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Width:\u003c\/strong\u003e 3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e Flat Handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Length:\u003c\/strong\u003e 130 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference:\u003c\/strong\u003e Helmut Zepf No. 41.540.03WM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign and Clinical Application\u003c\/h2\u003e\u003cp\u003eThis \u003cstrong\u003eBone Chisel\u003c\/strong\u003e features a straight blade profile with the Modified Vienna configuration — a well-established design trusted by surgeons and periodontists worldwide. The flat handle provides a stable, ergonomic grip that minimizes hand fatigue during extended procedures, while the 130 mm total length offers an optimal balance between reach and maneuverability in the surgical field.\u003c\/p\u003e\u003cp\u003eWith a 3 mm working width, this instrument is ideally suited for targeted osteotomy work, ridge modification, and precise bone shaping procedures where controlled force delivery and accuracy are paramount. The Modified Vienna design ensures consistent performance across a broad range of osseous surgical applications.\u003c\/p\u003e\u003ch2\u003eGerman Manufacturing Standards\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/p\u003e\u003cp\u003eEvery \u003cstrong\u003eBone Chisel\u003c\/strong\u003e produced by Helmut Zepf GmbH adheres to stringent German manufacturing standards, ensuring consistent dimensional accuracy, material integrity, and long-term performance across repeated sterilization cycles.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat procedures is this instrument designed for?\u003c\/strong\u003e It is designed for osseous surgery procedures including bone shaping, ridge modification, and osteotomy work in oral and maxillofacial or periodontal surgical settings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the working width?\u003c\/strong\u003e The working width is 3 mm, suited for precise, targeted bone manipulation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this instrument reusable and sterilizable?\u003c\/strong\u003e As a professional-grade German-manufactured instrument, it is designed for clinical use with repeated sterilization cycles. Specific sterilization protocols should be followed per applicable clinical guidelines.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":50531335242014,"sku":"41.540.03WM","price":105.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/4154003wm_1_9b6b3f6f-97c9-4beb-b9fb-7fd998d2c7ff.jpg?v=1781197374"},{"product_id":"bone-chisel-modified-vienna-straight-4mm-helmut-zepf-41-540-04wm","title":"Bone Rotary Chisel - Modified Vienna, Straight, 4 mm, Flat Handle Total Length 130 mm  | Helmut Zepf No. 41.540.04WM","description":"\u003cp\u003eThe \u003cstrong\u003eBone Chisel\u003c\/strong\u003e by Helmut Zepf — model No. 41.540.04WM — is a precision-engineered rotary instrument designed for exacting osseous procedures in clinical dentistry. This Modified Vienna, Straight configuration features a 4 mm working end and a flat handle, delivering the balance of control and force transmission demanded by dental professionals.\u003c\/p\u003e\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Bone Rotary Chisel, Modified Vienna, Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Width:\u003c\/strong\u003e 4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e Flat Handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Length:\u003c\/strong\u003e 130 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Helmut Zepf GmbH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem No.:\u003c\/strong\u003e 41.540.04WM\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign and Craftsmanship\u003c\/h2\u003e\u003cp\u003eThis \u003cstrong\u003eBone Chisel\u003c\/strong\u003e is manufactured in Germany, reflecting consistent dimensional accuracy, superior material selection, and rigorous quality standards. The flat handle ergonomics support precise rotational control, reducing hand fatigue during extended clinical use. The straight blade geometry allows direct access and controlled bone removal across a range of oral surgical applications, making it a dependable instrument for experienced practitioners.\u003c\/p\u003e\u003ch2\u003eClinical Application\u003c\/h2\u003e\u003cp\u003eThis instrument is well-suited for oral surgery, periodontal procedures, and implantology workflows where careful osseous contouring is required. The Modified Vienna design offers a refined cutting edge geometry, making this \u003cstrong\u003eBone Chisel\u003c\/strong\u003e a reliable choice for clinicians who demand consistent, repeatable results in demanding surgical environments.\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/MadeInGermanySmall.png?v=1775134964\" alt=\"Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany\"\u003e\u003c\/div\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat procedures is this Bone Chisel used for?\u003c\/strong\u003e It is designed for osseous procedures in oral surgery, including bone contouring and removal in periodontal and implant-related workflows.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the total length of this instrument?\u003c\/strong\u003e The total length is 130 mm with a 4 mm working end and a flat handle design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this instrument made in Germany?\u003c\/strong\u003e Yes, Helmut Zepf instruments are manufactured in Germany to rigorous quality and precision standards.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":50531335274782,"sku":"41.540.04WM","price":105.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/4154004wm_1_64b87301-fa51-4bb0-85f7-a1dbc12d6044.jpg?v=1781197371"},{"product_id":"back-action-chisel-4mm-5mm-combo-double-ended-zepf","title":"Back Action Chisel 4mm\/5mm Combo, Double Ended by Dr. Hürzeler and Dr. Zuhr, Tips Exchangeable, TOUCHGRIP Design | Helmut Zepf No. 24.744.70HZU","description":"\u003cp\u003eThe \u003cstrong\u003eBack Action Chisel\u003c\/strong\u003e 4mm\/5mm Combo is a double-ended periodontal instrument co-developed by Dr. Hürzeler and Dr. Zuhr, engineered to deliver precise, controlled tissue management in demanding clinical environments. Featuring the signature TOUCHGRIP design, this instrument provides exceptional tactile feedback and ergonomic handling for the discerning clinician.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-ended design:\u003c\/strong\u003e Combines a 4mm and 5mm tip in a single instrument for versatile chairside use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExchangeable tips:\u003c\/strong\u003e Tips are fully interchangeable, allowing for cost-effective maintenance and extended instrument life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTOUCHGRIP Design:\u003c\/strong\u003e Engineered for superior grip, reduced hand fatigue, and enhanced tactile sensitivity during delicate surgical procedures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpert collaboration:\u003c\/strong\u003e Developed in partnership with Dr. Hürzeler and Dr. Zuhr, renowned specialists in periodontics and implant dentistry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in Germany:\u003c\/strong\u003e Manufactured by Helmut Zepf GmbH to the highest standards of precision and quality.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstrument Details\u003c\/h2\u003e\u003cp\u003eThis \u003cstrong\u003eBack Action Chisel\u003c\/strong\u003e is part of the Helmut Zepf Hürzeler\/Zuhr TOUCHGRIP instrument series. The exchangeable tip system ensures long-term value without compromising on performance or hygiene. The instrument is ideally suited for periodontal and mucogingival surgical procedures where precise tissue reflection and manipulation are required. The double-ended configuration reduces instrument exchanges at chairside, supporting a more efficient and focused surgical workflow.\u003c\/p\u003e\u003cp\u003eFor comprehensive product and series information, refer to the official \u003ca href=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":50565275255070,"sku":"24.744.70HZU","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/files\/2474470HZU.png?v=1781195841"},{"product_id":"periodontal-chisel-insert-fedi-2-tip","title":"Periodontal Chisel Insert, Fedi 2","description":"\u003cp\u003eThe \u003cstrong\u003ePeriodontal Chisel Insert\u003c\/strong\u003e is a precision instrument designed for use in periodontal therapy, enabling clinicians to perform targeted scaling and root planing procedures with accuracy and control. Manufactured by Helmut Zepf GmbH, the Fedi 2 variant is engineered to meet the demanding requirements of periodontal practice.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDesigned specifically for periodontal scaling and debridement procedures\u003c\/li\u003e\n\u003cli\u003eChisel-style tip geometry suited to subgingival and interproximal access\u003c\/li\u003e\n\u003cli\u003eCompatible with standard ultrasonic or manual instrument systems as appropriate\u003c\/li\u003e\n\u003cli\u003eCrafted to deliver consistent performance and durability in clinical use\u003c\/li\u003e\n\u003cli\u003eFedi 2 designation indicates a specific blade angulation and curvature for targeted site adaptation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClinical Application\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003ePeriodontal Chisel Insert\u003c\/strong\u003e Fedi 2 is particularly well suited to accessing periodontal pockets and furcation areas where conventional instruments may be limited. Its chisel profile allows effective deposit removal while minimizing trauma to surrounding soft tissue. Clinicians rely on the \u003cstrong\u003ePeriodontal Chisel Insert\u003c\/strong\u003e to achieve thorough root surface debridement, a critical step in managing periodontal disease and supporting long-term patient outcomes.\u003c\/p\u003e\u003ch2\u003eAbout Helmut Zepf GmbH\u003c\/h2\u003e\u003cp\u003eHelmut Zepf GmbH is a recognized manufacturer of high-quality dental and surgical instruments. Their product range reflects a commitment to precision engineering and clinical reliability, making instruments such as the \u003cstrong\u003ePeriodontal Chisel Insert\u003c\/strong\u003e a trusted choice among dental professionals.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Fedi 2 designation?\u003c\/strong\u003e The Fedi 2 refers to a specific design variant within the periodontal chisel insert range, characterized by a particular blade shape and angulation intended for targeted clinical use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho manufactures this instrument?\u003c\/strong\u003e This instrument is manufactured by Helmut Zepf GmbH, a specialist in dental and surgical instrument production.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat procedures is this insert used for?\u003c\/strong\u003e It is used for periodontal scaling, root planing, and subgingival debridement as part of non-surgical periodontal therapy.\u003c\/p\u003e","brand":"Helmut Zepf GmbH","offers":[{"title":"Default Title","offer_id":50796896649502,"sku":"24.751.526ML","price":39.08,"currency_code":"USD","in_stock":true}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/1318\/5566\/collections\/2449400_1.jpg?v=1782252248","url":"https:\/\/deutschedt.com\/collections\/periodontal-chisels.oembed","provider":"Deutsche Dental Technologien","version":"1.0","type":"link"}