879K Conical Torpedo Diamond Bur – Busch, Made in Germany

Which Busch 879K Do You Need?

Choose the grit first, then the head size; every active 879K in the collection is linked once below, and the last three digits of each Busch number are the ISO head size.

Busch 879K diamonds – FG, super coarse and coarse grit

Busch No.	Pattern or size
5879K 018	ISO size 018 (1.8 mm) · super coarse grit, black ring · FG · pack of 6
6879K 016	ISO size 016 (1.6 mm) · coarse grit, green ring · FG · pack of 6
6879K 018	ISO size 018 (1.8 mm) · coarse grit, green ring · FG · pack of 6
6879K 021	ISO size 021 (2.1 mm) · coarse grit, green ring · FG · pack of 6

Busch 879K diamonds – FG, medium grit

Busch No.	Pattern or size
879K 014	ISO size 014 (1.4 mm) · medium grit · FG · pack of 6
879K 016	ISO size 016 (1.6 mm) · medium grit · FG · pack of 6
879K 018	ISO size 018 (1.8 mm) · medium grit · FG · pack of 6

Busch 879K diamonds – FG, fine grit

Busch No.	Pattern or size
8879K 014	ISO size 014 (1.4 mm) · fine grit, red ring · FG · pack of 2
8879K 016	ISO size 016 (1.6 mm) · fine grit, red ring · FG · pack of 2
8879K 018	ISO size 018 (1.8 mm) · fine grit, red ring · FG · pack of 2

Choosing a Grit

Busch marks grit with a colored ring and a prefix on the figure number, so you can order the exact 879K you need:

• Super Coarse (black ring): Busch No. 5879K for fast bulk removal
• Coarse (green ring): Busch No. 6879K for rapid reduction
• Medium (standard): Busch No. 879K for everyday preparation
• Fine (red ring): Busch No. 8879K for refining margins and surfaces

Sizes and Shanks

The three-digit size code is the head diameter in tenths of a millimeter (for example, 012 = 1.2 mm).

• FG (friction grip, 1.6 mm shank for the high-speed handpiece)

See the Busch Bur Size Chart for full dimensions and the Dental Bur Speed Chart for maximum recommended speeds.

Made in Germany by Busch & Co.

Busch & Co. has manufactured rotary instruments in Engelskirchen, Germany since 1905. Each diamond is produced under ISO 13485-certified quality management on a concentric shank for smooth, chatter-free cutting, and is covered by our Busch warranty.

Clinical Use

• Chamfer margins: a conical torpedo profile for a defined chamfer with more taper.
• Axial reduction: tapered walls and a rounded gingival termination in one pass.
• Crown preparation: efficient full-coverage preparation with consistent convergence.

Care and Reconditioning

Busch rotary instruments are reusable: clean, disinfect and sterilize them between patients according to the manufacturer’s instructions, and replace a bur once it dulls or shows damage. Our Dental Bur Reprocessing & Sterilization Guide walks through the workflow for carbide, diamond and steel instruments.

Compare With

Related Busch collections: 877K Conical Torpedo Diamond Bur, 878K Conical Torpedo Diamond Bur, 879 Torpedo Diamond Bur, Torpedo Diamonds for Chamfer Margins, and Crown and Bridge Dental Burs. For numbering, sizes and speeds, see the US Bur Number Finder, the Color Coding & ISO Guide and the Dental Bur Speed Chart.

Reference resources: Bur Comparison Chart · Size Chart · Bur Glossary · All Busch Diamond Burs

FAQ

What sizes does the Busch 879K come in? We carry the 879K in head sizes 014 (1.4 mm), 016 (1.6 mm), 018 (1.8 mm) and 021 (2.1 mm).

What do the numbers in front of 879K mean? They indicate grit: 5879K is super coarse, 6879K is coarse, 879K with no prefix is medium and 8879K is fine.

Which handpiece does the 879K fit? Every 879K on this page has an FG (friction grip, 1.6 mm shank for the high-speed handpiece).

Can Busch diamonds be reused? Yes. Clean, disinfect and sterilize between patients following the Bur Sterilization Guide, and replace the bur when cutting efficiency drops.