Busch & Co. · Collection

847 Flat-End Taper Diamond Bur – Busch, Made in Germany

The Busch 847 is a flat-end taper diamond bur, made by Busch & Co. in Engelskirchen, Germany. This page brings together every 847 we carry: head sizes 012 (1.2 mm), 014 (1.4 mm), 016 (1.6 mm), 018 (1.8 mm) and 023 (2.3 mm), in coarse, medium and fine grit, on HP and FG shanks. Every bur ships from our US warehouse.

Since 1905 · ISO 13485 · Made in GermanyShips from the US
847 Flat-End Taper Diamond Bur – Busch, Made in Germany
9 instruments
View as

Which 847 Diamond Do You Need?

Pick the shank first, then the grit (6847 coarse, 847 medium, 8847 fine) and the head size; every active product in the collection is linked once below.

847 flat-end taper diamonds, FG (high-speed)6 items
Busch No. Pattern or size
6847 012 ISO size 012 (1.2 mm) · Coarse Grit, Green Ring · FG · pack of 6
847 012 ISO size 012 (1.2 mm) · Medium Grit · FG · pack of 6
8847 012 ISO size 012 (1.2 mm) · Fine Grit, Red Ring · FG · pack of 2
847 014 ISO size 014 (1.4 mm) · Medium Grit · FG · pack of 6
6847 016 ISO size 016 (1.6 mm) · Coarse Grit, Green Ring · FG · pack of 6
847 016 ISO size 016 (1.6 mm) · Medium Grit · FG · pack of 6
847 flat-end taper diamonds, HP (straight handpiece)3 items
Busch No. Pattern or size
847 014 ISO size 014 (1.4 mm) · Medium Grit · HP · pack of 2
847 018 ISO size 018 (1.8 mm) · Medium Grit · HP · pack of 2
847 023 ISO size 023 (2.3 mm) · Medium Grit · HP · pack of 2

Choosing a Grit

Busch marks grit with a colored ring and a prefix on the figure number, so you can order the exact 847 you need:

  • Coarse (green ring): Busch No. 6847 for rapid reduction
  • Medium (standard): Busch No. 847 for everyday preparation
  • Fine (red ring): Busch No. 8847 for refining margins and surfaces

Sizes and Shanks

The three-digit size code is the head diameter in tenths of a millimeter (for example, 012 = 1.2 mm).

  • HP (2.35 mm shank for the straight handpiece)
  • FG (friction grip, 1.6 mm shank for the high-speed handpiece)

See the Busch Bur Size Chart for full dimensions and the Dental Bur Speed Chart for maximum recommended speeds.

Made in Germany by Busch & Co.

Busch & Co. has manufactured rotary instruments in Engelskirchen, Germany since 1905. Each diamond is produced under ISO 13485-certified quality management on a concentric shank for smooth, chatter-free cutting. Every Busch instrument is covered by our Busch warranty.

Clinical Use

The 847 is used on crown preparations for the following steps:

  • Shoulder margins: butt-joint shoulder finish lines on crown preparations.
  • Tapered axial walls: building in the correct convergence for crown retention in one pass.
  • Occlusal reduction: flat, even reduction of occlusal and incisal surfaces.

Need a rounded internal angle for an all-ceramic or zirconia crown? See the 847KR rounded-edge taper.

Care and Reconditioning

Clean, disinfect and sterilize the instruments between uses following the manufacturer instructions and the symbols on each package, and replace an instrument once it loses cutting or polishing performance or shows damage. Our Dental Bur Reprocessing & Sterilization Guide covers the workflow for Busch rotary instruments; maximum speeds are in the Dental Bur Speed Chart.

Compare With

Related Busch collections: 847KR Rounded-Edge Taper Diamond Bur, 846 Flat-End Taper Diamond Bur, 848 Flat-End Taper Diamond Bur, 845 Flat-End Taper Diamond Bur, 854 Flat-End Taper (Lab) Diamond Bur, and Dental Diamond Bur Collection. Reference pages: Crown Preparation & Margin Bur Guide · Color Coding & ISO Guide.

Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany

FAQ

What sizes does the Busch 847 come in?

We carry the 847 in head sizes 012 (1.2 mm), 014 (1.4 mm), 016 (1.6 mm), 018 (1.8 mm) and 023 (2.3 mm).

What do the numbers in front of 847 mean?

They indicate grit: 6847 is coarse, 847 with no prefix is medium and 8847 is fine.

Should I order FG or HP?

FG fits the high-speed handpiece used for most clinical preparation. HP fits the straight handpiece used for laboratory work and chairside adjustments.

Can Busch diamonds be reused?

Yes. Clean, disinfect and sterilize between patients following the Bur Sterilization Guide, and replace the bur when cutting efficiency drops.

Related resources: Bur Comparison Chart · Size Chart · Bur Glossary · All Busch Diamond Burs

Expert Help
Not sure which instrument fits your procedure?
Talk to our instrument specialists for selection assistance.
60-day returns
Busch products: 60 days, unopened and unused.
Returns & Refunds
Warranty
Coverage differs by instrument line; the warranty page lists each one.
View warranty
Made in Germany, shipped from the US
Busch & Co. has been making burs in Germany since 1905, under ISO 13485.

Compare /5

Loading...