Helmut Zepf · Collection

Onyx Dental Scissors

Onyx scissors are Helmut Zepf scissors finished with a black Onyx coating, which Zepf combines with its Supercut grinding.

Since 1921 · Made in GermanyShips from the US
Onyx Dental Scissors
11 instruments
View as

Why Black Surgical Scissors? Dr. Rasner on ONYX SuperCut

“All scissors are not created equal.” Dr. Steven Rasner on Helmut Zepf ONYX SuperCut scissors: one razor-sharp blade, one micro-serrated blade that holds tissue, and a matte-black ONYX coating that cuts glare and improves contrast. Dr. Rasner’s picks: Iris Curved ONYX SuperCut (46.051.11TISC) and Kelly Curved ONYX SuperCut (46.077.16TISC). Course info: Rasner Institute live-patient surgical courses. Deutsche Dental Technologien is a Course Partner of the Rasner Institute. Watch on YouTube.

Video chapters & transcript
  • 0:00 — All scissors are not created equal
  • 0:07 — SuperCut: one sharp blade, one micro-serrated blade
  • 0:26 — Why black? The ONYX coating

Dr. Steven Rasner:

One of the things I tell my dentists in my surgical courses is that all scissors are not created equal.

These are German-made SuperCut scissors from Deutsche Dental. One blade is designed for an extremely sharp cut, while the other, micro-serrated blade holds the tissue so it doesn’t slide away from you. That translates into a very precise, controlled cut, which is exactly what I’m looking for.

By the way, why black? Matte-black surgical scissors are used to reduce light reflection and improve contrast against the surgical field. They aren’t just pretty, they’re effective.

The edge follows the pattern: most models have the Supercut micro-serrated edge, the Kelly and Dean have serrated edges and the Castroviejo micro scissors are micro-serrated; what the Onyx changes is the surface — a hard, dark coating that kills the glare of loupes, headlights and microscope illumination, and shrugs off the discoloration that bright steel picks up over hundreds of cycles.

Every Onyx model carries the TISC suffix, and the pattern range covers the fine trimmers and dissectors where you work under magnification.

All instruments are made in Germany by Helmut Zepf — fully autoclavable, corrosion-resistant, and engineered to hold their edge through hundreds of sterilization cycles.

Which Onyx Scissors Do You Need?

Pick the pattern first, then select the Zepf number; every Onyx-coated model ends in TISC. Every product in the collection is linked once below.

Iris, La Grange and Goldman-Fox Onyx gum scissors5 items
Zepf No. Pattern or size
46.050.11TISC Iris Scissors, Straight, Extra Large Rings, 11.5 cm, Supercut Micro Serrated Edge, Onyx Coating
46.051.11TISC Iris Scissors, Curved, Extra Large Rings, 11.5 cm, Supercut Micro Serrated Edge, Onyx Coating
46.057.11TISC La Grange Scissors, Compound Curved, 11.5 cm, Supercut Micro Serrated Edge, Onyx Coating
46.200.13TISC Goldman Fox Scissors, Straight, 13 cm, Supercut Micro Serrated Edge, Onyx Coating
46.201.13TISC Goldman Fox Scissors, Curved, 13 cm, Supercut Micro Serrated Edge, Onyx Coating
Metzenbaum, Joseph, Kelly and Dean Onyx scissors4 items
Zepf No. Pattern or size
46.431.14TISC Metzenbaum (Metz) Scissors, Curved, Blunt/Blunt Point, 14 cm, Supercut Micro Serrated Edge, Onyx Coating
46.081.16TISC Joseph Scissors, Curved, 14 cm, Supercut Micro Serrated Edge, Onyx Coating
46.077.16TISC Kelly Scissors, Curved, 6 in, Supercut Serrated Edge, Onyx Coating
46.123.17TISC Dean Scissors, 17 cm, Serrated Edge, Onyx Coating
Castroviejo Onyx micro scissors2 items
Zepf No. Pattern or size
46.319.17TISC Castroviejo Scissors, ZEPF-Line, Micro-Serrated, Sharp/Sharp, Curved, 17 cm, Onyx Coating
46.321.16TISC Castroviejo Scissors, ZEPF-Line, Micro-Serrated, Sharp/Sharp, 45° Angulated, 16 cm, Onyx Coating

Why Choose Zepf Onyx?

  • No glare — Black blades under loupes and LED lights — the tip stays visible against the tissue
  • Supercut grinding underneath — Zepf pairs the Onyx coating with its Supercut grinding for a sharp edge and low cutting pressure
  • Surface protection — The coating resists staining and wear marks that dull bright steel
  • Easy identification — Black instruments are found first on a crowded tray

History: Where the Onyx Edge Came From

Black and dark coatings on surgical instruments came out of laser and microscope surgery in the late twentieth century, where a reflective blade under intense illumination could blind the surgeon to the very tip they were guiding — and, in laser work, reflect the beam. Instrument makers answered with hard, non-reflective surface treatments, and Helmut Zepf's Onyx line brings that idea to dental scissors: a Supercut blade, a black coating, and a tip you can see under any light.

Not sure which pattern you need? Our Dental & Surgical Scissor Selection Guide compares all 15 Helmut Zepf scissors patterns — what each is for, what it is not for — and its style chart sets Standard, Supercut, TC and Onyx editions side by side. Enjoy expert support at (917) 480-2682 ext 101 and competitive pricing on authentic Helmut Zepf instruments.

Clinical Use

  • Periodontal plastic surgery under loupes
  • Microsurgery under the operating microscope
  • Aesthetic-zone trimming with headlight illumination
  • Any procedure where blade reflection hides the tip
  • Practices that colour-code instrument sets

Care and Reconditioning

Clean, disinfect and sterilize the scissors between patients with the blades open, following the manufacturer instructions and the symbols on each product package, and keep the joint lightly lubricated. Have worn edges reground only by a qualified service. Our Surgical Instrument Reprocessing & Sterilization Guide covers the general workflow for Helmut Zepf surgical instruments.

Compare With

Related Helmut Zepf collections: Supercut Scissors, Tungsten Carbide (TC) Scissors, Micro Spring Castroviejo Scissors, Metzenbaum Scissors, Curved Gum Scissors, and Dental Scissors. Our Dental & Surgical Scissor Selection Guide compares the scissors patterns and the Standard, Supercut, TC and Onyx editions side by side.

Technical references: Surgical Instrument Comparison Chart · Surgical Instrument Glossary

Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany

FAQ

Is Onyx a different edge from Supercut?

No — Helmut Zepf combines the Onyx coating with its Supercut grinding (the TISC suffix), though the edge pattern varies by model: serrated on the Kelly and Dean, micro-serrated on the Castroviejo. If you want the Supercut shear without the coating, buy the SC model; if you work under loupes or a scope, the Onyx earns its premium.

Does the coating wear off when sharpened?

Sharpening removes the coating along the cutting edge only; the rest of the blade stays black. Use our serrated scissors sharpening service — never a chairside stone, which destroys the micro-serration.

How do Onyx, Supercut and tungsten carbide compare?

The style comparison chart in our Scissor Selection Guide sets all four editions side by side — edge, feel, edge life, glare and price.

Where are these scissors made?

Every scissors in this collection is forged and finished by Helmut Zepf Medizintechnik in Seitingen-Oberflacht, Germany — precision dental and surgical instruments since 1921.

Further reading: Dental & Surgical Scissor Selection Guide · Standard vs Supercut vs TC vs Onyx — the comparison chart

Part of the Dental Scissors hub.

Expert Help
Not sure which instrument fits your procedure?
Talk to our instrument specialists for selection assistance.
60-day returns
Helmut Zepf instruments are returnable within 60 days for any reason, even if used.
Returns & Refunds
Warranty
Coverage differs by instrument line; the warranty page lists each one.
View warranty
Made in Germany, shipped from the US
Helmut Zepf has been making instruments in Germany since 1921.

Compare /5

Loading...