McCall 17/18 Universal Curette

The McCall 17/18 is a universal curette for posterior teeth. McCall curettes are universal curettes with two cutting edges, shaped for the interdental spaces of their region. Helmut Zepf makes it in 1 configuration plus 2 replacement inserts, all in Germany, and every one on this page ships from our US warehouse.

Which McCall 17/18 Universal Curette Do You Need?

Clinical Use of the McCall 17/18 Universal Curette

• Posterior teeth: both cutting edges are used, so the mesial and distal surfaces of each tooth are covered with the same instrument.
• Subgingival scaling and root planing: keep the face of the blade at 90 degrees to the shank, adapt the lower cutting edge to the root, and use short overlapping strokes.
• Deep and narrow sites: choose the M5 version when pockets exceed 5 mm; the very-fine-tip inserts suit tight interproximal spaces.

Versions, Coatings and Handles

The ZEPF-bIONIK handle is Zepf’s ergonomic, colour-coded handle with a textured grip that reduces hand fatigue. Interchangeable inserts fit the M4 × 0.5 mm and M2.5 Zepf handle systems (ZEPF-bIONIK QUICKFIX, Z-SHAPE Relax, ZEPF-Line) and change with the Zepf safety key.

Sharpening, Retipping and Inserts

An instrument earns its keep only while it is sharp. Zepf instruments can be sharpened in the practice, sent to our sharpening and reconditioning service, or, on the interchangeable-insert versions, renewed in seconds by swapping the working ends. Sharpening stones and oil are in the diagnostic range.

Warranty and Our Guarantee

Every Zepf instrument on this page carries a one-year Helmut Zepf Warranty against defects in materials and workmanship. And because an instrument can only be judged in the hand, you have 60 days to return it for any reason — even after you have used it. Try it on real patients; if it is not the instrument for you, send it back.

Made in Germany by Helmut Zepf

Helmut Zepf has manufactured dental and surgical instruments in Germany for over 100 years. Every instrument on this page is forged, ground and finished by Zepf and carries its part number for traceability.

Compare With

Base pattern designations shown. Same clinical pattern, not identical manufacture. Brand names belong to their owners and are used only to identify the pattern; no affiliation or endorsement is implied.

FAQ

What is a McCall 17/18 used for? Universal scaling and root planing of posterior teeth: one instrument covers both mesial and distal surfaces.

Universal or area-specific? A universal curette works both sides of the tooth with its two cutting edges; an area-specific Gracey has one cutting edge and a shank made for one region. Many clinicians keep both.

What does M5 mean? Zepf’s deep-scaling design: a first shank about 3 mm longer and 0.95 mm thin, with a shortened working end, for pockets deeper than 5 mm and narrow roots.

Is there a warranty? One year under the Helmut Zepf Warranty, and 60 days to return it for any reason, even after use.

Related resources: Hygiene Instrument Comparison Chart · Gracey Curette Numbers & Types Guide · Dental Hygiene Instruments