US No. 1700 Bur – Busch Tapered Fissure Carbide, Made in Germany
The US No. 1700 is the American number for a tapered fissure bur with a 1 mm head (ISO size 010): a cone with a rounded end, so the walls it cuts diverge toward the occlusal and meet the floor in rounded line angles. Busch & Co. manufactures it in Germany as Busch No. 33R 010. Every US No. 1700 on this page is a genuine Busch instrument and ships from our US warehouse.
Busch & Co. GmbH
Regular price $40.99Unit price
Reference pages already linked from this collection, in one place.
Which US No. 1700 Do You Need?
The No. 1700 in this collection is the carbide HP version, linked below by its Busch number.
HP (straight handpiece)1 items
| Busch No. | US No. | Material | Cut | Shank | Best for | Pack |
|---|---|---|---|---|---|---|
| 33R 010 | 1700 | Carbide | Crosscut | HP | Straight handpiece: laboratory and denture work, rounded end | 6 |
HP (2.35 mm shank, straight handpiece). See the Busch Bur Size Chart for head and shank dimensions.
Speed and Technique
Keep the bur parallel to the intended path of insertion so the taper of the head becomes the taper of the wall; run these HP burs at laboratory speed in the straight handpiece. Maximum recommended speeds for every Busch shape are in our Dental Bur Speed Chart, and reprocessing steps in the Bur Sterilization Guide.
Made in Germany by Busch & Co.
Busch & Co. has manufactured rotary instruments in Engelskirchen, Germany since 1905. Every instrument on this page is a genuine Busch product, precision-ground on a concentric shank under ISO 13485-certified quality management and covered by our Busch warranty.
Clinical Use
- Laboratory work: the HP carbide version cuts acrylic and plaster in the straight handpiece.
- Tapered walls in the laboratory: the cone cuts walls with a built-in taper in acrylic, wax and model materials, for example when trimming models or relieving acrylic.
At 1 mm the No. 1700 is a mid-size cone for general laboratory cutting.
The No. 1700 is crosscut; its plain-cut twin in the same shape and size is the US No. 1170 (Busch 23R 010). Crosscut blades cut faster and clear debris; when you need a smooth wall or a finish line, follow with the plain-cut twin or a finishing bur.
Care and Reconditioning
Busch carbide and steel burs are reusable: clean, disinfect and sterilize them between patients following the manufacturer instructions and replace them once they dull. Our Dental Bur Reprocessing & Sterilization Guide gives the steps for Busch rotary instruments.
Compare With
Related Busch collections: US No. 1170 Bur (plain-cut), US No. 1701 Bur, US No. 1702 Bur, Tapered Fissure (Cone) Burs, Double Cut Burs: Busch Crosscut Carbide Cutters, and HP Burs for the Straight Handpiece. For bur numbering and dimensions, see the Busch Bur Size Chart and the Dental Bur Glossary.
Related resources: US Bur Number Finder · Bur Comparison Chart · Speed Chart · Bur Glossary · Nearby sizes: US No. 1701, US No. 1702
FAQ
What is the Busch number for a US 1700 bur?
Busch No. 33R 010 in carbide (HP).
What size is a No. 1700 bur?
The No. 1700 has a 1 mm head diameter (ISO size 010) on a tapered fissure bur head, ISO shape 194 (cone, round end).
What is the difference between a No. 1700 and a No. 1170?
Same shape and size; one is plain-cut and the other crosscut. The No. 1700 is crosscut — crosscut cuts faster and clears debris, plain-cut leaves a smoother surface.
Are Busch No. 1700 burs reusable?
Yes. Carbide and steel burs are cleaned, disinfected and sterilized between patients and replaced when they dull; the Bur Sterilization Guide gives the validated steps.
