US No. 7002 Bur – Busch Finishing Round Steel, Made in Germany

The US No. 7002 is the American number for a round finishing bur with a 1 mm head (ISO size 010): a round head with many fine blades that smooth rather than cut, for finishing restorations and margins. Busch & Co. manufactures it in Germany as Busch No. 41 010. Every US No. 7002 on this page is a genuine Busch instrument and ships from our US warehouse.

Which US No. 7002 Do You Need?

US No.	Busch No.	Material	Cut	Shank	Best for	Pack
7002	41 010	Steel	—	HP	Economical laboratory cutting of acrylics and plaster	6

HP (2.35 mm shank, straight handpiece). See the Busch Bur Size Chart for head and shank dimensions.

Clinical Uses of the US No. 7002

Composite and amalgam finishing: smoothing occlusal and marginal areas after contouring without gouging.
Margin refinement: blending restoration margins into tooth structure.
Laboratory finishing: the steel HP versions smooth acrylic and remove tool marks in the straight handpiece.

At 1 mm the No. 7002 is a small finishing head for pits and fine margins.

Speed and Technique

Finishing burs work at reduced pressure: use them with water spray in the contra-angle or high-speed handpiece and let the blade count produce the surface; heavy pressure only dulls them. Maximum recommended speeds for every Busch shape are in our Dental Bur Speed Chart, and reprocessing steps in the Bur Sterilization Guide.

Made in Germany by Busch & Co.

Busch & Co. has manufactured rotary instruments in Engelskirchen, Germany since 1905. Every instrument on this page is a genuine Busch product, precision-ground on a concentric shank under ISO-certified quality management and guaranteed to arrive free of manufacturing defects under our Busch arrival guarantee.

Dental Instruments, Tools, Burs, Diamonds and Polishers Made In Germany

FAQ

What is the Busch number for a US 7002 bur? Busch No. 41 010 in steel (HP).

What size is a No. 7002 bur? The No. 7002 has a 1 mm head diameter (ISO size 010) on a round finishing bur head, multi-bladed round finishing head.

Are Busch No. 7002 burs reusable? Yes. Carbide and steel burs are cleaned, disinfected and sterilized between patients and replaced when they dull; the Bur Sterilization Guide gives the validated steps.

Related resources: US Bur Number Finder · Bur Comparison Chart · Speed Chart · Bur Glossary · Nearby sizes: US No. 7004, US No. 7005